![]() |
#21
|
||||
|
||||
![]() Then the madness began
![]() ![]() Took out the sliding glass doors to the deck for clearance, and got the tank onto a dolly. ![]() ![]() Last edited by loveless; 05-18-2009 at 05:24 PM. Reason: wrong photo |
#22
|
||||
|
||||
![]() That was the easy part.
![]() This is where it gets reallllly sketchy ![]() ![]() It was good that Niel took charge of the whole moving part, someone needs to take charge of this whole thing to make it safer and smoother for everyone. Definitely shows that he has done it before. ![]() |
#23
|
||||
|
||||
![]() ![]() Down it goes ![]() ![]() The boys on the bottom, Brave souls ![]() Dont know if it could have been a tighter fit ![]() |
#24
|
||||
|
||||
![]() Hard part over. At this point a lot of stress was gone from the whole operation
![]() ![]() ![]() Ahhhh relief, glad that is over, was a heavy last lift to get it up onto the stand ![]() |
#25
|
|||||
|
|||||
![]() Holey smokes, that looks like it was quite the tight fit down those stairs and the ceiling clearance. Can't wait to see it up and running!
![]()
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
#26
|
||||
|
||||
![]() Now the overflow had to be siliconed in place.
![]() ![]() First fish....Catfish ![]() Hope that dosnt overload the system. Thanks for viewing Cam |
#27
|
||||
|
||||
![]() I actually made a mock up of the tank out of 2x4's to see if it would work. First one was 96" long, and wouldnt fit, so i cut it down to 90" and it just barely made it. So it was a good thing i did.
|
#28
|
||||
|
||||
![]() The tank is drilled for closed loop. going to have 2 reeflow snappers for CL and additional one for return.
|
#29
|
|||||
|
|||||
![]() Woowzers, nice tank! Yup, anything too much bigger than that, borders on site building territory. A round of kudos to the crew that got that beast in the house.
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |
#30
|
|||||
|
|||||
![]() Sweet tank. Will be awesome.
But, seeing those pictures of the stairs and stuff ... brought back memories of wrestling my 280g downstairs. You just inadvertently convinced me that I'm never upgrading .. or downgrading for that matter. I am done moving tanks up and down stairs. ![]()
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |