![]() |
#21
|
|||||
|
|||||
![]() I am inclined to agree with Steve (an unusual happening) Actinics should be used to adjust the color of the tank. As such the bulb will lose some intensity over time, but as it is only supplemental lighting there is no reason to rush out and replace the bulb.
![]()
__________________
Bob ----------------------------------------------------- To be loved you have to be nice to people every day - To be hated you don't have to do squat. ---------Homer Simpson-------- |
#22
|
|||||
|
|||||
![]() Quote:
Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#23
|
||||
|
||||
![]() Sorry, I thought the issue was about using VHO's as the main lighting source.
Rick |
#24
|
|||||
|
|||||
![]() Quote:
I am looking for a way to light a softy/LPS tank myself and I am considering not using MH for this one. but then again I might anyways. but actinic is my real question for these T5's I have PC's on my little one right now and would like a bit more actinic on it. Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#25
|
||||
|
||||
![]() Using T5's as a sole lighting system, I found that the tank quality took a turn for the worse at 6mo. This included an increase in algae growth in the forms of green hair and the green stuff on the glass. After around the 8mo. mark my corals closed up more often and the fast growth rate that I initially had dropped off to almost nothing. I changed the bulbs at this point.
I used T5's only because I couldn't afford a full lighting system up front and the T5's allowed me to expand as my budget allowed. If I had to do it again without using halides, which is what I currently run, I would run power compacts. This is solely due to the fact that you have to replace them less often. If you can afford the halide and you already have the PC's, why don't you make those actinic and throw on a bluer halide, say a 20K? You won't have the same replacement cost as is associated with a full compliment of PC's Rick |
#26
|
|||||
|
|||||
![]() Quote:
![]()
__________________
Bob ----------------------------------------------------- To be loved you have to be nice to people every day - To be hated you don't have to do squat. ---------Homer Simpson-------- |
#27
|
|||||
|
|||||
![]() Quote:
Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#28
|
|||||
|
|||||
![]() Lights are on their way. I'll post when i try them out.
Walter
__________________
*30g+- (24x16x18) *Seio 620 + MJ1200 *EuroReef 5-2 *Ebo - 100w Heater *250w PFO HQI w/XM20k |
#29
|
||||
|
||||
![]() Quote:
|
#30
|
|||||
|
|||||
![]() Quote:
Maybe it depends on the bulb or the ballast overdriving/underdriving the bulb? When I had 55W GE9325K bulbs running on the Workhorse ballast, there was a very noticeable decrease in visual light after 6 months. My purple cap would turn brown by the 6 month mark and would turn purple again again changing bulbs. As for Actinics, I measured my dissolved oxygen levels with only the 95W VHO Actinics powered on. There was very little increase in oxygen which leads me to conclude that not much photosynthesis was going on under 95W of Actinics. There was slightly more DO under the 96W 50/50 bulb. And of course, there was significantly more under the MH. |