![]() |
#11
|
||||
|
||||
![]() hey kari, you got a canadian tire part # for that ?
|
#12
|
|||||
|
|||||
![]() Asfar as I know they no longer sell it, cause it used to be on their webpage ut it's not their anymore....it's made by wetlands
__________________
500G Mixed Reef ![]() __________________________________ Electrician, Electronics Technician, I can help with any electrical questions you might have!! __________________________________ Kevin |
#13
|
|||||
|
|||||
![]() well i was so stoked about doing this, i did it last night.
Here's the pic of the whole skimmer (with pennies taped on) ![]() BUBBLES IN MAIN RISER BEFORE MODIFICATION: ![]() BUBBLES IN SECONDARY RISER BEFORE MODIFICATION: ![]() MOD PICS: BECKETT NOZZLE DISASSEMBLED PLUGGED WITH EPOXY ![]() BECKETT NOZZLE ASSEMBLED ![]() BECKETT NOZZLE SHAVED ![]() BECKETT NOZZLE DRILLED ![]() BUBBLES IN MAIN RISER ~1 MINUTE AFTER MODIFICATION: ![]() BUBBLES IN SECONDARY RISER ~2 MINUTES AFTER MODIFICATION: ![]()
__________________
____________ If people don't die, it wouldn't make living important. And why do we fall? So we can learn to pick ourselves up. |
#14
|
|||||
|
|||||
![]() ![]() ![]() ![]() ![]()
__________________
____________ If people don't die, it wouldn't make living important. And why do we fall? So we can learn to pick ourselves up. |
#15
|
|||||
|
|||||
![]() i'll take more pics tonight after its been running for about 12 hours.
__________________
____________ If people don't die, it wouldn't make living important. And why do we fall? So we can learn to pick ourselves up. |
#16
|
|||||
|
|||||
![]() Dem tiny bubbles!
When I get a camera I will do the same with non-modded skimmer.
__________________
250 BB Starphire SPS, clams, & zoos 3 x 250 DE, IC 660 W/T5s OM 4-way, Hammerhead Pump Calcium, Kalk, RO filters, magnesium, Excellent prices |
#17
|
|||||
|
|||||
![]() hmm... I don't really see much of a difference?
|
#18
|
|||||
|
|||||
![]() OK here are the pics 12 hours later.
![]() ![]() I personally don't see much of a difference. Mind you the bubbles were already pretty small to start of with even prior to the modification. I would like for somebody who's using a mak4 on a beckett skimmer to try the same mod.
__________________
____________ If people don't die, it wouldn't make living important. And why do we fall? So we can learn to pick ourselves up. |
#19
|
|||||
|
|||||
![]() Chin, your bubbles were a lot smaller to start with than most Beckets I've seen. I can't see much of a difference either.
Maybe there is a threshold to how small bubbles can get, and your skimmer had already achieved it. I'd still be interested to see other peoples results with this mod.
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#20
|
|||||
|
|||||
![]() Its been just over a week since I've done this mod and the bubble sizes have not changed.
BUT I want to mention that I have not had to clean my skimmer since ....... OK not completely true cuz i had to squirt water in the collection cup so i could see the foam on top. But I haven't had to remove the top riser to clean it out because once I had set the air valve to achieve the foam level to spurt over the top, i have not had the air valve clog up on me since. Without any change to the bubble sizes that I can visually observe, I will still recommend this modification to beckett owners because it didn't decrease the performance any and for me, i had not have to clean the skimmer for a week. I'll post the next time i do have to clean the skimmer riser.
__________________
____________ If people don't die, it wouldn't make living important. And why do we fall? So we can learn to pick ourselves up. |