265 gallon setup

[niloc16]

here is a couple pictures of my new 265 gallon tank on the stand, it is a little difficult to see where it ends but the cardboard on top is the cap and goes the whole length, there is another tank up against it at the end, sorry for the bad picture. the dimensions are 84"L X 24"W X 30"D. and the other pic is of the 5 chamber reactor, its also not a great photo but there will be better ones later. this reactor is amazing, it does it all and then some. definitely worth looking into for you to upgrade or to even start with a calcium reactor. i've got everything from hidden reef and they have been amazing, mike nikki and mark have spent countless hours answering my questions and bending over backwards to help me out. the tank should be plumbed in the next week, hopefully earlier (huh hmmm mike?) just kidding. i'm using a 70 gallon sump underneath with a dart for a return and a barracuda for the closed loop, i'm thinking this is still insufficient flow in the tank but we'll see how it turns out. skimmer is still in the air as to what to use but mike is looking into some options. some of you may have followed my other post of starting a 125 but i upgraded from that before it was done, figured it was easier to do now rather than later. for additional flow i'm thinking possibly 2 tunzes with controller or wavy seas with controller. i'm leaning towards tunzes but hope you guys can give some input here

[niloc16]

today i bought my equipment for my saltwater mixing. i 33gallon garbage can, GX 6000 pump to push the new water up to my sump on the main floor. i also installed my RO/DI unit and started flushing the system, i'm still waiting to get the fittings for it to do a final install. i installed the plumbing in the wall and through my cold air duct of the furnace to the main floor and installed 2 cable mounting plates and drilled the holes out to fit the RO line and the new salt water line. a neater install will be done in the basement once i get the remainging fittings for the RO. let me know what you think, and if someone would let me know how to make the pictures bigger on the post that would be awesome

this is the wall outlets where the lines will come through



this is the plumbing in the floor joists going in to the cold air duct

here is the mixing bucket roughed in



here is the RO/DI installed and roughed in just flushing out

[Squiddy]

Have you got a webspace somewhere that you can host the pictures on? Like shaw webspace? If you put the pictures somewhere like that, you can have them a lot bigger.

[niloc16]

no i dont but thanks anyway

[Ruth]

You can sign up to host your pictures on photobucket - it's free and even I can do it most of the time.
What skimmer is that in the 2nd picture?

[Jason McK]

Looks Great Colin So have you decided on a skimmer. How bout that massive H&S.

J