![]() |
#11
|
|||||
|
|||||
![]() Also they come in single track most hardware stores carry them http://www.kncrowder.com/slidingdoor/c104-994.php and the will easily support well over 150lbs, lots of the doors I have hung can hit 200 lbs easy for a solid wood 8' door
|
#12
|
|||||
|
|||||
![]() Quote:
__________________
Jason |
#13
|
||||
|
||||
![]() if you have a windsor plywood out in your area the bypass door track is a double run and uses 4 wheels per roller.i've installed these in some apartments with 7'+ doors at about 40-50 lbs a door(4 doors on a track)also the by pass hardwear is a lot beefier than a normal track where the doors butt into each other
|
#14
|
|||||
|
|||||
![]() I'd like to have one single or double 10' track that each pendant can slide either direction and can support up to 150 lbs. These would accommodate that then?
__________________
Jason |
#15
|
||||
|
||||
![]() the double track will.i know they come in 8' lenths,not sure about 10'.they are 3 1/8 wide,2 5/8 deep.all hardwear is included with them
|
#16
|
|||||
|
|||||
![]() Any idea of the approximate cost? Thanks for your help too.
__________________
Jason |
#17
|
||||
|
||||
![]() We are also installing 8' solid core doors that are pocket/ barn door style. We use heavy aluminum tracks that come with heavy duty trucks from Hafele. Great product to work with.
|
#18
|
|||||
|
|||||
![]() So I went to Windsor Plywood this morning and ordered up a 10' bypass door double track assembly for only $130 so I'm happy with that. Capable for up to 200 lbs. They said they also use it for barn doors too. Thanks for your help everyone. Much appreciated.
__________________
Jason |
#19
|
||||
|
||||
![]() you might want to mount a 1x4 or a strip of 3/4 plywood to your ceiling first,then mount the track.it will be stronger in the long run
|
#20
|
|||||
|
|||||
![]() I'm going to have to figure out a way to square up the part of the roof I'm mounting the track to. The roof slopes downwards perpendicular to the tank and tracks.
__________________
Jason |