Acrylic vs Glass

[BackPackHunter]

The one thing that is a 100% is that it's going to be built in with only the front glass showing, Hinding the edges. And it will be 36" deep, and 36-42" wide. Working in a 36" deep is not a lot of fun so the extra work cleaning is not wanted...
With only be able to get at anything is threw the back, so I'll be into it wast deep.

The only advantage with acrylic I can see is its lighter n easier to drill
I'm thinking this tank is going to have to be built in place anyway so weight, not that big of deal ...

[Reef Pilot]

Originally Posted by BackPackHunter

With only be able to get at anything is threw the back, so I'll be into it wast deep.

No access from the front? How are you going to clean the coralline off the front glass, when the mag cleaner doesn't get it all? I can see a lot of accidental frags in the future once it is all grown out.

Also, going to be kind of hard to position and rearrange your corals in the front, when you can't see what you are doing?

[Ryanerickson]

About 2 years ago I had a customer with a acrylic tank that I cleaned only access was from the back. Sorry tank was in wall he paid me $60 a hour to clean it even at that rate it was the worst job I have ever had and only 24" deep in the past I have cleaned tanks for many of people with no problem loved the job but combo of cleaning from back and acrylic made it so hard I never got it perfectly clean just to hard getting the bottom and corners after my second cleaning I told him I had no interest in cleaning his tank anymore IMO his tank was the worst design ever.

[mark]

well now that you decided glass, what type?

Starfire is great just my experience is a dogs nails can scratch it (I'm agreeing with other posts out there it's seems softer that regular glass).

[BackPackHunter]

Originally Posted by mark

well now that you decided glass, what type?

Starfire is great just my experience is a dogs nails can scratch it (I'm agreeing with other posts out there it's seems softer that regular glass).

ive been doing a lot of reading of glass also...
and a lot of people are saying that the starfire scratches very easy, and some say they never had a problem...
I read a post that someone used a low iron starfire glass thats not normally used in aquariums, because of its cost being a lot more then normal starfire, and it was very hard and scratch resistant , im going to look into that a lot more, as for the other sides i dont care to much if they scratch up, im going to be painting them black and probably letting them grow out
the tank is going to be built into the living room wall, and want to keep it very clean looking , like its just a living picture ...

[BackPackHunter]

Originally Posted by Reef Pilot

No access from the front? How are you going to clean the coralline off the front glass, when the mag cleaner doesn't get it all? I can see a lot of accidental frags in the future once it is all grown out.

Also, going to be kind of hard to position and rearrange your corals in the front, when you can't see what you are doing?

i will be having a hot shower, putting swimming shorts & goggles and getting in there, had to do that with my last 36" deep tank.
that tank i was able to view 360, so cleaning was easier. with this tank i plan on having a piece of 1" plywood thats as long as the tank to distribute my weight so i can lay on top and not have to get as far in.

the aquascaping is going to be more at the back of the tank, leaving the front clean and open, for the bigger fish to have a good spot to swim in the open if they want , so hopefully there wont be any unwanted frags...