|
#1
|
|||||
|
|||||
|
#2
|
|||||
|
|||||
If anyone is interested, I'll probably be making a custom order for the 4-LDD pcb boards with the pull down resistor jumper that rrasco made on the RC thread. PM me if you interested in any of the boards...
|
#3
|
||||
|
||||
Quote:
New LEDs for the main tank coming it the summer! Whoooo! |
#4
|
||||
|
||||
Quote:
GND - ground IN1 to IN8 - Arduino outputs Take a jumper, connect to GND and to any of the IN1 to IN8 inputs. You should hear the relay latch. |
#5
|
||||
|
||||
Quote:
These changes will work. Low = on and high = off. Intermittently, this logic used to turn the relay on & off will work backwards because of the opto-iso. Jamie does have a SSR (solid state relay) setup which is installed & wired directly behind the outlet. This setup is the most stable and the quietest - SSR don't make the mechanical latching sounds. I hope this helps! |
#6
|
||||
|
||||
Is anyone have LDD-350H drivers spare? Would be nice if I could have three.
Thanks, Kevin
__________________
Wow! That's Crazy! Why would you spend that much and go through all that trouble? |
#7
|
|||||
|
|||||
Quote:
Scubasteve: Sweet, thanks! |
#8
|
||||
|
||||
Ya, I have the same things (700 & 1000).
__________________
Wow! That's Crazy! Why would you spend that much and go through all that trouble? |
#9
|
|||||
|
|||||
Well again another very early morning thanks to the ever so diligent crows and robins
Oh, well, might as well do something constructive. This is what my office now looks like, lol And I got everything hooked up and it seems to be running, yaaaaaaay The Arduino up and running the code: And a shot of the panel box everything is mounted in temporarily: I'm still waiting for my amphenol connectors that's why everything is only temporarily connected. I couldn't think of another way to test fire everything at once to make sure it all worked together. I also want to get this thing over my 77 gal and see if it has a positive effect on the coral and algae I just can't seem to kick. I do have MH bulbs that are 8 months old or so and at this point I'm not buying bulbs with this thing so close to operational. I also have not finished my fan circuitry so right now the fans are not running on my heatsinks so that's next on the priority list. I also have to fine tune the Arduino code because I have a couple channels used that the original code was using for sump lights and such that I'm not using. So I have to figure that out. Anyway, that's an update for now. Hope ya'll enjoy. It appears to be getting lots of views but it's so quite in here |
#10
|
||||
|
||||
Quote:
Mine took about 2-1/2 weeks to arrive. I do suggest ordering than what you need simply because they're so cheap!!! |