Led lights for a 90g

[Cliff]

Sorry burgerchow, I did not notice your above post before I typed the one above.

[The Grizz]

Originally Posted by burgerchow

Looked at the AI's and Radions but their mounting options leave a lot to be desired.

there are some options out there to mount the AI & Radion out there, you just have to talk to the right people.

[mike31154]

As already mentioned in the thread, newer LED fixture & DIY options are appearing at a breakneck pace. I finally jumped off the fence earlier this year & decided on a high power 10 watt LED array build. These LED arrays, or multi chips are available in increasingly high wattages, over 100 watts per chip and some of the 100 watt chips are capable of handling twice that power, i.e. over 200 watts. They are also now available with different LED colours suitable for our hobby combined on the same chip.

Here's a photo of some of the components I've used. 10 watt LEDs in 3 different colours. Decided not to use the optics, they were the wrong size (made for 20 watt & larger LEDs) & the glass lens is way too heavy. I have 27 of these LEDs on my fixture & if I used those optics it would weigh a ton. One of the reasons I chose to build this way is to save weight by not using large heatsinks. I'm getting plenty of punch & very good colour blend without optics & the fixture 8" above the water. I've found the 10 watt LEDs to be a great balance between power & ability to blend colour without needing too many of them.



I have a thread of the build going in the DIY forum here. I suspect that if you were to disassemble a Kessil LED, you would find similar components, a high power LED, probably in the 30 to 50 watt range, with optics & fan.

[Semaka]

Well boys and girls I have finaly decided on a LED fixture. It is a diy from Rapid LED. 2x 36 Premium LED DIY with XPGs and XTEs (2 to 1 ratio of Royal blue and Cool White XPGs). Comes with a dimmable drive. I picked 4 9x6 drilled black Heat sinks. To this I'll add another dimmable drive, able to drive 14 extra leds. These will be 8 UV and 4 probably red idk yet (maybe green). An array of 4 complete modules of a total of 86 leds comes to a total cost of 845$ transport included. Thus, allowing me to connect this bad boy to a brand new Neptune Apex lite that I can now afford .
Yey for DIY thunderstorms

[The Grizz]

Originally Posted by burgerchow

I would wait til next week and check out the release of the new Kissel A350 led spotlights. Been doing a lot of research on the current A150, and they seem pretty impressive. You would probably only need 2 units for your . I will be replacing my MH with a pair of A350s as soon as they're available. The only led that can closely replicate MH, including the tank shimmer

Originally Posted by fishytime

thats not true....most higher wattage LEDs will produce the shimmer....my Radion shimmers even with only the "royal blues"running at 3%

My DIY LED's from Modular LED have a great shimmer, not as much washout from the LED's as the MH & I am getting much better growth on everything in my tank under the LED'S