Aquatic essential calcium reactor how to?

[shiftline]

Oh perfect! That makes my life easier. For a feed pump I was going to make a manifold off a seperste DC pun for some reactors. Wold tapping off that cause any issues or do the trick for a feed pump. In Theory it can only take in what it drips out to make space for

Now I need to find a PM1 module to run an extra probe.

Does it matter if the unit sits inside the sump? Likely depends on the pump Not sure if it will fit otherwise as of yet. So it looks like I need a 1/2" tap for that fitting?

The pump is also a little loud. Would a Jabeo DC pump work well for this?

[whatcaneyedo]

The manifold idea sounds good. I feed my skimmer, CA reactor and media reactor with the same pump. Inside the sump is probably best. Things often leak sooner or later. Ask around locally to see if you can borrow a tap. I bought one and it was $30-40... I don't have any experience with the Jabeo.

[shiftline]

I ordered a 1/2" tap of Amazon last night.! Perfect. I also have 1/8 and 1/4 from a set I bought a while back. Picked up some manifold parts too! I love building stuff!

Also found a used ehiem pump that should work and be fairly quiet. I'll give it a test and buy it if it's silent

[shiftline]

[shiftline]

What drip rate for effluent and bubble count for co2 is a good starting point with this reactor?