What would you do? Again with the x@#^*! Dosing

[spawn]

Micheal here are the pics of it. Incase they didn't come through on the email. FYI for anyone who has this it was super easy to take apart. The longest part was putting the pics to email/ canreef.

[Aqua-Digital]

This does not show what we asked sorry, we need to see photos as posted here by us showing the underside of the ribbon cable connection and the front panel removed.

I can not offer support here, please contact me directly.

[spawn]

Here are pics of the front board removed & of the underside of the ribbon cable. I do not have tools small enough to remove the ribbon cable from the front, & therefor cannot take a pic. of the inside of the pinhole. However at this point i would say it is crystal clear there has never been a drop of moisture inside of this unit. Sorry I'm having now luck attaching photos to the email.

[Aqua-Digital]

Other than pump wear due to no servicing as discussed by email then I doubt the unit is at fault, they are pretty bullet proof

I have given some suggestions by email, please go through these to rule out unit issue, but as said above other than lack of servicing which can lead to the unit dosing less than dialled in, i dont see any issues, but I will continue to support you via email.

One last thing, pump calibration is important - make sure you have calibrated the unit recently as per instruction manual.

[spawn]

Thx. Micheal I think the unit is fine as well. I just feel the random dosing on the auto setting doses inappropriately close to one another. I'm not saying that this is causing the precip, but could likely play a part. Like said it is probably a shitty batch of chems.