![]() |
|
View Poll Results: In consideration of Tank Crashes... | |||
My tank has suffered a full crash |
![]() ![]() ![]() ![]() |
20 | 13.33% |
My tank has suffered a partial crash |
![]() ![]() ![]() ![]() |
34 | 22.67% |
My tank has never crashed, but has potential problems |
![]() ![]() ![]() ![]() |
40 | 26.67% |
My tank is bullet proof |
![]() ![]() ![]() ![]() |
16 | 10.67% |
Crash caused by equipment failure |
![]() ![]() ![]() ![]() |
21 | 14.00% |
Crash caused by temperature deviation |
![]() ![]() ![]() ![]() |
13 | 8.67% |
Crash caused by electrical failure |
![]() ![]() ![]() ![]() |
13 | 8.67% |
Crash caused by system design flaw |
![]() ![]() ![]() ![]() |
7 | 4.67% |
Crash caused by water chemistry |
![]() ![]() ![]() ![]() |
15 | 10.00% |
Crash caused by low oxygen levels |
![]() ![]() ![]() ![]() |
8 | 5.33% |
Crash caused by disease or parasites |
![]() ![]() ![]() ![]() |
15 | 10.00% |
Crash caused by Old Tank Syndrome |
![]() ![]() ![]() ![]() |
2 | 1.33% |
Crash caused by New Tank Syndrome (rushing it) |
![]() ![]() ![]() ![]() |
6 | 4.00% |
The cause is not listed in this poll |
![]() ![]() ![]() ![]() |
13 | 8.67% |
The crash was completely out of my control |
![]() ![]() ![]() ![]() |
9 | 6.00% |
Multiple Choice Poll. Voters: 150. You may not vote on this poll |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]() FULL CRASH!!! Front pane of my 55g completely blew out.
|
#2
|
||||
|
||||
![]() Had a leathers vs. LPS chemical war which resulted in the LPS dead but otherwise no crashes. *knocks on tank stand* I've never had a single dead fish/invert cause problems which is nice, don't need to feel in a panic if that does happen, they pretty much just become food.
[edit] My skimmer pumped 2 gallons of water on the floor because I didn't tighten it properly one time, but luckily I only run it 12hrs on during the night so it didn't have a chance to really do much. |
#3
|
|||||
|
|||||
![]() major crash due to moving.... took longer than I thought
|
#4
|
|||||
|
|||||
![]() So here’s how the numbers break down.
The first 4 questions were a group. There were 88 votes in this section: My tank has suffered a full crash – 17%It’s almost a 50/50 split between those who have had a crash and those who haven’t. The next category was intended to identify why tanks crash. It was hard to phrase these causes as I didn’t want the poll to be too long. Regardless, there is some good information that came back. The major causes of tank crashes (for those who voted) are: #1 (16 votes) - Equipment FailureWater Chemistry had the second most votes at (13) but I am disqualifying the response as it seems that this is the end result from almost all failures and not specifically a root cause. Each person will learn their own lessons from these statistics. For me, the results tell a number of things.
I don’t actually believe that a tank can be “bullet proof”. Every aspect of my system is redundant, but I can still imagine a dozen scenarios that would lead to a crash. It could be as simple as knocking a food container into the tank. It seems that once something goes wrong, there is a cascade effect ultimately leading to bad water. It’s important to have a plan for detecting and responding to the initial failure before it is too late. For example, when I dumped half of a reactor filled with Kalkwasser into my tank, the pH shot up to around 11.5 – I was able to bring the pH back down using Vinegar. I did not lose anything. Had I tried to solve this problem with water changes, I probably would have lost the tank. Another interesting question might have been - How many people come back to the hobby after a full tank crash? Presumably, these aren't the people hanging out on Canreef, but my guess is that many a good reef keeper is lost to a tank crash. Anyways, an interesting question and interesting results. Thanks for the discussion. - Brad |
#5
|
|||||
|
|||||
![]() I didn't add to the poll, as I don't think I qualify for anything listed, but can say there can be other issues besides crashes.
I haven't really ever experienced a crash, but I have experienced my fair share of problems. Most prominent was the loss of most of my SPS. Can't ever tell you why or how, it just happened, and it has been over a year, maybe 2 of this garbage... But now SPS is growing, I wouldn't say thriving, but growing and seeing positive things that were not there before. And what have I done, really nothing. Gone back to the KISS method (Keep It Simple Stupid)... No more pellets, no more carbon, no more fany stuff like Zeo... Just a back refuge full of live rock rubble, then through a skimmer, then through some cheato. And oh, yeah some filter socks. Nothing more!
__________________
![]() Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO) Type of Aquarium: mixed reef (SPS & LPS) with fish Dosing: Mg, Ca, Alk |
#6
|
|||||
|
|||||
![]() It's all about the KISS I agree 100%.
I'm noticing a lot of corals and especially my acans look better in a big tank with relatively new water. I suspect a lot of our issues are due to years of a system running depleting stuff we never replenish to the same extent. I did a few very large water changes on my last tank and I do believe there's real value in doing so as you sorta do a hard reset on these things. |
#7
|
|||||
|
|||||
![]() Quote:
__________________
Brad |
#8
|
|||||
|
|||||
![]() Quote:
![]()
__________________
360 gallon sps reef, 180 gal sump, bubble king supermarine 300, 4xmp40Wes, 2 x 6215 tunze waveboxes, 4 ghl mitras 360 Reef Tank |
#9
|
|||||
|
|||||
![]() More than a decade ago I had a tank crash from a faulty heater sticking in the ON setting. Cooked the tank at 98F. The only thing to survive was a Coral Banded Jerk...I mean Shrimp. I learned from that experience and now use two small heaters instead of one big one. Or in the case of my reef, no heater!
![]() |