New Chinese LED fixture

[gobytron]

I'd love for you to just keep doing what you're doing an keep us up on this lights performance based on your experiences with it and not others opinions based on others opinions...

[ReefOcean]

Originally Posted by StirCrazy

The PAR output seams to be about 1/2 of a good 3 watt system, but havign said that if your not keeping SPS and you have a tank under 16" deep it should be good.

Steve

Many people keep SPS under this secific light. A 3 watt system (I am assuming you are talking about the defunct polaris, the aquaillumina and the vertex) are better at busting out PAR, but depending on the light placement and coral placement it can easily match a 250 halide.

[StirCrazy]

Originally Posted by ReefOcean

Many people keep SPS under this secific light. A 3 watt system (I am assuming you are talking about the defunct polaris, the aquaillumina and the vertex) are better at busting out PAR, but depending on the light placement and coral placement it can easily match a 250 halide.

that won't come any where near the output of a 250 watt MH. if you look at the link you put up there PAR at 40 CM was 125, frankly this sucks. my 250 watt MH have a PAR of 400 at 60 CM so saying this comes close to 250 watt outputs is streaching it if not a blatient lie. I supose if you had a 2 year old MH bulb driven off a probe start ballast and a junky reflector it would be close. in fact the readings you are using for reference say older bulbs with salt creep on them.

I wasn't refering to the solarius or any others, but rather to all the home made ones that have been comming out int he last year using cree 3W LEDs and good drives. thoes ones with optics are meeting or exceding 250 watt MH levels at 18" (45cm)

people keep SPS under NO tubes also, they grow real slow, are close to the top and are for the most part brown.
If you keep your sps in the top 8" of the tank with that light they will do ok, in the top 4" they will do good, but they arn't going to be a show piece under that light plain and simple, but there are always the exceptions.

Steve

[ReefOcean]

Originally Posted by StirCrazy

that won't come any where near the output of a 250 watt MH. if you look at the link you put up there PAR at 40 CM was 125, frankly this sucks. my 250 watt MH have a PAR of 400 at 60 CM so saying this comes close to 250 watt outputs is streaching it if not a blatient lie. I supose if you had a 2 year old MH bulb driven off a probe start ballast and a junky reflector it would be close. in fact the readings you are using for reference say older bulbs with salt creep on them.

I wasn't refering to the solarius or any others, but rather to all the home made ones that have been comming out int he last year using cree 3W LEDs and good drives. thoes ones with optics are meeting or exceding 250 watt MH levels at 18" (45cm)

people keep SPS under NO tubes also, they grow real slow, are close to the top and are for the most part brown.
If you keep your sps in the top 8" of the tank with that light they will do ok, in the top 4" they will do good, but they arn't going to be a show piece under that light plain and simple, but there are always the exceptions.

Steve

according to Lukeys second reading, the par at 10cm in 365, crossing that with the 250 MH data posted on the sames page that matches, if not betters the 250 at that depth. Obviously, the led has some penetration issues and the par drops off at about 20cm. For my purpose, it matches. Not for a 30 inch tank though. If my coral was at 30 inches, it would be 15 inches below my tank. I think you are being a bit over dramatic about the whole sucking issue... old salt covered bulbs and whatnot.