I hate my tank!

[Snaz]

Originally Posted by jslaney

So thanks to Syeve's suggestion I went and got my water tested. All I have for specific Grav is a red sea hydrometer. It was reading 1.026 which is perfect as I understand it.

When the very kind fellow at Ocean City tested my water using a refractometer it read as 1.033. So I am guessing that is the biggest problem.

I will still look into getting RO/DI and have allready bought chlorine remover for my top ups.

Lastly thank you for everyones help and I think the lesson here is dont ever trust crappy hydrometers and before you start adding life go get your water double tested.

Jon.

Certainly the high SG is very bad.

The issue with your top ups is not the chlorine as you already address that by having it sitting out for 24Hr. The issue is the TDS, phosphate, copper and other crap from your tap. STOP PUTTING IN TAPWATER! If you can't get an RO/DI unit then do as I do and get the 20 litre bottles from a reputable water filter company.

[Myka]

You already have some great advice here. Did your LFS test your water for calcium? Did they get the same results? What brand of salt are you using? Are you using any additives at all? You aren't using Purple Up are you? I would also suggest upping your flow to 15-20x turnover. What types of corals are you wanting to keep? Both softies and LPS corals will do well with that type of turnover. Your low turnover combined with using tap water (+1 for getting an RO/DI and a TDS meter) are likely your biggest issues, not the high salinity. The high salinity would be contributing to the high calcium reading. Oh, and for the record, you can continue to use your hydrometer, just remember that your particular hydrometer is out by 0.007, so aim for 1.019 on your hydrometer, and that should put your sg at 1.026. you can always double check by taking some water to your LFS again.

Check out the guides in my signature, I think you would find a lot of the information in them very helpful.