Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Tank Journal

Reply
 
Thread Tools Display Modes
  #1  
Old 12-03-2008, 05:22 PM
GreenSpottedPuffer's Avatar
GreenSpottedPuffer GreenSpottedPuffer is offline
Member
 
Join Date: Jan 2007
Location: Vancouver
Posts: 2,337
GreenSpottedPuffer is an unknown quantity at this point
Default

Quote:
Originally Posted by nazerine View Post
Hey,

The drain type you're looking for would be an "external durso". The idea of the T off the back of the tank, with an air vent is to create a tunnel of air down the center of the pipe, so the water flows quietly down the pipe; this won't be silent, but quiet.

If you're not running the T or air-flow into the pipe, and just a 90, then you would be trying to create a syphon (herbie) which you cannot do with that type of overflow.

Do you have plans for a backup drain??

I cannot find the proper picture of the bottom drain for in-sump that I was thinking of... but this is something similar: (found on nano-reef)

http://www.daemonfly.com/images/2.5g/lowerdurso.jpg
Thanks. You can do a herbie with this overflow but you need a second hole drilled. I have seen it done and it works the exact same as a regular herbie. So its just in my case that it can't be done.

Off the back of the bulkhead is a T for airflow. I am also wondering though about putting a T somewhere near the bottom. I know some people were apparently doing this to make things even quieter but I can't remember why or how?

Thanks for the link. I will check it out.
Reply With Quote
  #2  
Old 12-03-2008, 05:26 PM
GreenSpottedPuffer's Avatar
GreenSpottedPuffer GreenSpottedPuffer is offline
Member
 
Join Date: Jan 2007
Location: Vancouver
Posts: 2,337
GreenSpottedPuffer is an unknown quantity at this point
Default

Yeah that link is basically what I am talking about I think.


The only thing I worry about with that one is how the water drains down to a "U" and then back up. I don't like the idea of having anywhere in the drain line with back pressure or a place for things to get stuck easily. I think I will do something like this but without that "U" in there.

Thanks again, that gives me a good idea.
Reply With Quote
  #3  
Old 12-03-2008, 05:28 PM
brizzo's Avatar
brizzo brizzo is offline
Member
 
Join Date: Apr 2006
Location: Kelowna BC
Posts: 504
brizzo is on a distinguished road
Default

Plumbing is always interesting, one thing I've seen posted on RC about durso style, is they quiet down over time once you get a 'slime coat' on the inside of your pipes. My nanocube is running a 1" herbie and is almost dead quiet. It makes splashing noise entering the overflow box though, hopefully going to fix that tonight

Not sure if you saw this link I posted in some other threads, but it's a very neat concept I'm going to put on my 75g;

http://www.beananimal.com/projects/s...ow-system.aspx
__________________
28g Nano Cube drilled with 13g sump in stock stand. Vertex IN80 Skimmer, Phosban 150 Reactor, Apex Controller, DIY LED with stock hood, dimmable
Established March 2006
Reply With Quote
  #4  
Old 12-04-2008, 04:34 AM
superduperwesman's Avatar
superduperwesman superduperwesman is offline
Member
 
Join Date: Sep 2007
Location: Calgary
Posts: 850
superduperwesman is on a distinguished road
Default

Quote:
Originally Posted by superduperwesman View Post
cool chair...where did you get it?
You can tell me. I mean even if I do go get the same one I won't post pictures of it and even if I did everyone would still know you got yours first
Reply With Quote
  #5  
Old 12-04-2008, 08:00 AM
GreenSpottedPuffer's Avatar
GreenSpottedPuffer GreenSpottedPuffer is offline
Member
 
Join Date: Jan 2007
Location: Vancouver
Posts: 2,337
GreenSpottedPuffer is an unknown quantity at this point
Default

Quote:
Originally Posted by superduperwesman View Post
You can tell me. I mean even if I do go get the same one I won't post pictures of it and even if I did everyone would still know you got yours first
LOL...sorry I am not trying to be secretive! I actually missed that!

Its a classic mid century modern design and actually quite common. The chair is designed by Ludwig Mies van der Rohe and is known as the "Barcelona Chair" It was unveiled in 1929 at the Ibero-American Exposition, which was hosted by Barcelona, Spain.

You can either find knock offs for around $600-800 per chair or originals (not made in 1929 but made by Knoll Studio these days) for $6000-$10,000 per chair. The difference is noticeable

I am a huge Mid Century Modern fan...so I could go on all day! I try to collect as many pieces as possible. Gets more expensive than aquariums if you can believe it!

Not the best pic but my favorite piece is in the far right corner of the room in this picture...



Just realized...I have no idea where the Barcelona Ottomans are in any of these pics! LOL. The chairs look funny without them...

Last edited by GreenSpottedPuffer; 12-04-2008 at 08:20 AM.
Reply With Quote
  #6  
Old 12-04-2008, 12:51 PM
Leah Leah is offline
Banned
 
Join Date: Oct 2008
Location: Penticton B.C.
Posts: 2,142
Leah is on a distinguished road
Default

Cool, Is this a sunroom? Question how do you find all the extra sunlight on the tank?
In the summer I get this algae on one side of my tank, its not the side closest to the window but the opposite side. Winter it goes away! Hard as heck to get off then magically poof it's gone. Back to your kitty and lizard love is blind. Love your tank too!
Reply With Quote
  #7  
Old 12-04-2008, 05:19 PM
GreenSpottedPuffer's Avatar
GreenSpottedPuffer GreenSpottedPuffer is offline
Member
 
Join Date: Jan 2007
Location: Vancouver
Posts: 2,337
GreenSpottedPuffer is an unknown quantity at this point
Default

Quote:
Originally Posted by Leah View Post
Cool, Is this a sunroom? Question how do you find all the extra sunlight on the tank?
In the summer I get this algae on one side of my tank, its not the side closest to the window but the opposite side. Winter it goes away! Hard as heck to get off then magically poof it's gone. Back to your kitty and lizard love is blind. Love your tank too!
No sunroom. Its just a living space/main room of my condo. The place is very small actually.

I never get algae in my tanks...Its seems like I should for various reasons but just don't. I think it has a lot to do with all the Limewater I top off with.
Reply With Quote
  #8  
Old 12-04-2008, 03:31 PM
superduperwesman's Avatar
superduperwesman superduperwesman is offline
Member
 
Join Date: Sep 2007
Location: Calgary
Posts: 850
superduperwesman is on a distinguished road
Default

Quote:
Originally Posted by GreenSpottedPuffer View Post
LOL...sorry I am not trying to be secretive! I actually missed that!

Its a classic mid century modern design and actually quite common. The chair is designed by Ludwig Mies van der Rohe and is known as the "Barcelona Chair" It was unveiled in 1929 at the Ibero-American Exposition, which was hosted by Barcelona, Spain.

You can either find knock offs for around $600-800 per chair or originals (not made in 1929 but made by Knoll Studio these days) for $6000-$10,000 per chair. The difference is noticeable

I am a huge Mid Century Modern fan...so I could go on all day! I try to collect as many pieces as possible. Gets more expensive than aquariums if you can believe it!

Not the best pic but my favorite piece is in the far right corner of the room in this picture...



Just realized...I have no idea where the Barcelona Ottomans are in any of these pics! LOL. The chairs look funny without them...
Dang your place is sexy... what's the deal??? What kinda place is that. Concrete floors concrete walls. I really like it!
Reply With Quote
  #9  
Old 12-04-2008, 05:17 PM
GreenSpottedPuffer's Avatar
GreenSpottedPuffer GreenSpottedPuffer is offline
Member
 
Join Date: Jan 2007
Location: Vancouver
Posts: 2,337
GreenSpottedPuffer is an unknown quantity at this point
Default

Quote:
Originally Posted by superduperwesman View Post
Dang your place is sexy... what's the deal??? What kinda place is that. Concrete floors concrete walls. I really like it!
Yeah its a Loft style Condo building designed by a European Designer to be artist live/work spaces. They have since opened it up to anyone but originally meant for artists only from what I have heard. The main entrance and hallways (outside my place) are HUGE and open and were set up to be an art gallery to host events. The most common question is "when are the floors going to be finished?"

This is what the building looks like...

Front Entrance



Outside


Last edited by GreenSpottedPuffer; 12-04-2008 at 05:22 PM.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 10:11 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.