Ghl Profilux Discussion And Support Thread

[Todd]

I am having a few problems with L1/L2, L3/L4. I had my Dimmable ballast and Tunze split on one port, this resulted in my ballast 'jumping' outputs along with the tunze, it would still dim and turn off correctly. I tried to put my LED bars together with the tunze on a splitter, but when I program them the LED bars take up two ports in the programing (one for blue lights, one for red).

Is this a hardware problem? How can this be resolved

[Aqua-Digital]

Hi

I am not sure what you mean by "jump outputs" but you can not run Tunze and LED on the same port pair.

It is also advisable to keep dimmable lighting on a seperate port as depending on how you have wired it the ballast can use both ports.

[Patrick1]

Hey Michael,

I spoke with you last week Any luck tracking down 3.08 firmware?? or can I just skip this step? I spent some time on the phone last week with Progressive reef but we couldn't get a few things figured out. I was thinking in the next couple of weeks I would try to set up a time to get you on the phone and sort out these things. No rush as I am sure your busy passing out cigars and hope you havent used the term "up the duff"..

Pm me when you get some free time and we'll get this up and running.

[Aqua-Digital]

Go straight to 4.04. firmware first followed by software

Phone support is as good as a chocolate tea pot! Time I have gone through everything, the client rarely remembers the first thing I said.

To this respect i only do email support, so email me what you wish to go through i can then give you step by step printable instructions

[Patrick1]

Ok I will get the upgrades done this week. I will then give you a complete list of everything I am running and how I want it set up. I will need you to send me your email address as my computer doesnt like your website contact for some reason. You know that has to be the first time I have every heard some one use the term "chocolate tea pot!"

Catch you next week

[Aqua-Digital]

British terminology!

sales@aqua-digital.com

Whole list Hope I am not expected to completely set up your whole controller

I will do what i can from over here in the far East of canada

[Funky_Fish14]

The software to operate the controller is simply available online and is free, correct?

This controller looks fantastic... its the first one to really grab my attention, the dosing pumps (8 of them needed) are my primary interest, but I must get the controller to run them as it has all the great options!

Pardon my ignorance, but how long have the controllers been around? It must have been, at least a couple years already?

*Edit - Progressive Reef also appears to be the only Western Can. retailer that actually has the controllers on their website?

Thanks!

Chris