![]() |
|
#1
|
|||||
|
|||||
![]() Quote:
|
#2
|
|||||
|
|||||
![]() Hmm, Ca seems a bit high for that alk level. Can you confirm with a second test kit?
(Steve, mEq/l x 2.8 will give you dKh).
__________________
Brad |
#3
|
||||
|
||||
![]() could be my readings are off, I am going to test again, I have often wondered about calcium as it never drops lower then 450, I may have to buy some new test kits and see if they are accurate.
|
#4
|
|||||
|
|||||
![]() Bring a sample into your LFS they should test it for free to see if your test kit is off.
|
#5
|
||||
|
||||
![]() Quote:
I used the reference tests and it shows my results are alittle off but not by that much, My alk is still stitting close to 4 - 4.5 meq and calcium is still around 425 - 450, my ph is stable at 8.1 and has not changed and i recalibrated my meter just to make sure. I am useing a prarie reef top off system and kalk reactor, and I was having my top off run through my reactor, so i changed the way my system tops off, I split the line before it hits the solinoid so i have one line running to my reactor and another line strictly for fresh water. I set my drip rate at aprox one drop every 20 seconds or 3 drops a minute, so now when my top off comes on it will just be fresh water instead of kalk saturated water. |