Well I think my plumbing is done. - Page 3

StirCrazy · #1 06-26-2002, 02:03 AM

Thanks Steph good to hear that it will work [img]smile.gif[/img]

well I finaly found something in this hobby that is cheep [img]smile.gif[/img] long lengths of hose for the RO unit.. 25' for 3.80 inc taxes :D : D
so now I have a hose all over the rood going to the front room whare my tank is.

Steve

Aquattro · #2 06-26-2002, 02:06 AM

So it looks like you'll be sleeping on the couch tonight, eh/

DJ88 · #3 06-26-2002, 02:10 AM

I am impressed steve.. Can't wait to see it with the rock and lights going..

No more fake shots tho.. ;)

Aquattro · #4 06-26-2002, 02:11 AM

I think I should drive over to Steve's to make sure he is really putting water in there and not just playing with Photoshop -LOL

DJ88 · #5 06-26-2002, 02:28 AM

Hee hee.. you know those photo editors.. easy to make anything appear real.. :D

bongy · #6 06-26-2002, 03:26 AM

Hi Steve,

Yes, but if you look at their selection guide here:

http://www.ipscorp.com/ind_html/selectind.html

You can see that they don't recommend 16 for PVC rigid to PVC rigid. I only use 16 on acrylic and PVC glue on PVC.

However, if your pipe is not under too much pressure and it works for you, then, it's probably ok. But just something to keep in mind next time.

Thanks.

Bongy

StirCrazy · #7 06-26-2002, 10:29 AM

Hopefuly it won't be a problem I am not actualy bonding PVC with it I am only putting around threased joints hoping to seal the threads with out taking it apart.. I checked it this morning it is as hard as rock so we will find out soon if it worked [img]smile.gif[/img]

Against my better judgment I left my RO unit going while I sleeped. I have 15" of water now.. 1/2" more that I calculates so all is good [img]smile.gif[/img]

Looks like tonight I will be adding salt and sand.

Steve

Axial Corillite · #8 06-26-2002, 01:51 PM

Hay steve I think i lost your phone # again :rolleyes: . Give me a call on my cell I only have a few tanks to clean today.
888-4638

Aquattro · #9 06-26-2002, 02:21 PM

Mike, I'll call you also. I need to get that 175w back.

SuperFudge · #10 06-26-2002, 08:53 PM

Quote:

Originally posted by StirCrazy:

No it won't as the spray bar is fed from one of the drains in the main tank, so when the water level drops below my overflow bar, the flow to that tank stops. the level in here is higher than the sumps so it will remain constand and the sump will take up al the drained down water.[/QB]

<font size="2" face="Verdana, Helvetica, sans-serif">Sorry Steve,i had meant the feeds for the main tank (each 1 inch dia? and on both sides at mid hieght in your tank)siphoning back thru your mag pump when the pump or power is off.

Marc.

[ 26 June 2002, 16:56: Message edited by: Superfudge ]