|
|
|
|
|
#1
10-27-2016, 01:06 PM
|
||||
|
||||
Unfortunately the tank is so close to the wall i don't know if i can fit anything but an elbow on. I will grab a few parts from home depot and see if i can make it fit. If not i will have to go with 3/4" after the 1.5" T, which i planned on putting in between the bulkheads at the same height as the bulkhead and having the tee directly in the middle of them.
Looks like 2-3/4" lines are slightly bigger then 1 - 1" line. I plan on running the pump at 100%. I pulled out the bulkhead and i definitely cannot fit a 1" bulkhead. Is it common to have 3/4" returns and a 1.5" drain? the 3/4" returns seem really limiting. 
|
|
#2
10-27-2016, 01:12 PM
|
|||||
|
|||||
|
Yeah 3/4" is the usual return size.
If you can't fit a 1" elbow behind the tank then put the reducer bushing on the bottom side of the elbow instead and use 3/4" elbow going into 1" pipe.
|
Hybrid Mode
