![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() I'm glad my tank is still in my basement because last night sometime a copper water pipe developed a pinhole leak in it and started flooding the ceiling above my old fish room. You can see the waterproof paint I used holds water too lol. I had used the kids' sled to funnel it into my old tank until I knew wtf was going on. I am very glad the reef was not still around for this. as it would have caught the dirty water into my overflow box undetected for some time.
The random hole in the pipe is not even where a welded connection is. Anyways it leaked about 80 gallons in the past 8 hours into the makeshift plumbing I setup that is feeding the tank. The feed lines for 4 other condos run thru the ceiling this is not even my own water pipe! And I thought the hot water tank blowing up on the other side of the basement last month was bad. In preparation to cut my tank apart I had removed all of the silicone in the tank not directly between pieces of glass so this tank cannot be trusted to hold 400 gallons. This morning I must bail out this water into a drain so that it can continue to hold until a plumber gets here today! The joys of post-reefing! ![]() ![]() ![]() |
#2
|
||||
|
||||
![]() i would take that as a sign that the tank needs water man
__________________
riceboys 82.7 gallon sps dominant tank -concept built 3'x2'x22" full starfire tank with starfire 1 piece eurobrace and built in wave box, 1 jebao wp25, 4 mp10wes, ati led Hybrid 8 bulb fixture, csc 250 skimmer, Magdrive 18 return pump, apex lite, custom sump from concepts, biopellet reactor and carbon and gfo,bubble magnus doser and jbj ato, custom acrylic frag tank with 6 bulb t5 http://www.canreef.com/vbulletin/showthread.php?t=70851 |
#3
|
|||||
|
|||||
![]() I have had that happen as well pipe gets old and then gets pin holes.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. |
#4
|
|||||
|
|||||
![]() Holy lucky!
__________________
![]() They call it addiction for a reason... |
#5
|
||||
|
||||
![]() I have copper pipes in my building and have had the pin hole leaks. talking with the plumber he said over the years the friction of the water moving thru the pipes actually thins the walls of the pipe causing pin holes. You should suggest that the pipe be replaced instead of repaired if the pipe has thinned, it could happen again on either side of the repair if the pipe is thin.
__________________
"Rules are for the obedience of fools and the guidance of wise men." |
#6
|
|||||
|
|||||
![]() Ok that paint is impressive. What did you use?! lol.
Sorry about the mess and bad luck and stuff though. I can't imagine what nightmare that would have resulted in a running tank.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#7
|
|||||
|
|||||
![]() Quote:
He will need access to my neighbors unit if the pipe itself needs replacing and access to the unit with the shutoffs as well. Fun times! Last edited by lastlight; 10-24-2012 at 04:22 PM. |
#8
|
|||||
|
|||||
![]() Quote:
Sent from my porcelain aquarium
__________________
Desperately seeking serenity ... 180g custom build http://www.canreef.com/vbulletin/showthread.php?t=81400 50g custom daycare tank... http://www.canreef.com/vbulletin/showthread.php?t=65428 |
![]() |
Thread Tools | |
Display Modes | |
|
|