![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]() Has anyone ever used someone locally to repair icecap ballasts ??
Mine is firing for a couple of minutes, then off and wont come back on again. That being said they also want $65 US to send them back and repair. Thanks for the help. Wendell |
#2
|
|||||
|
|||||
![]() how old is it ?
Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#3
|
|||||
|
|||||
![]() hey there Wendell i have had the same problem it turned out to be the plug silly old me ,i would tey putting on a new plug to see if that is it and then try the fuse in there too..
Mike
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. |
#4
|
||||
|
||||
![]() Wendell:
You may want to try B.C.I.T. I am sure some student in the electronic labs can help you out. -=Bryan=-
__________________
-=Bryan=- |
#5
|
||||
|
||||
![]() Mike
I have a few of these so I just changed the ballast and worked fine. Wendell PS I know I have to send them back just trying to save the dough. |
#6
|
|||||
|
|||||
![]() Has anyone opened up an Icecap ballast, are they encased with epoxy?
Just curious, because I'm curious whether epoxy filled e-ballasts are truly "repairable." I fried an electronic ballast last night (wow ... there goes $160 down the drain) because there appears to have been a short in the light fixture. Ballast says "do not connect lamp leads to ground." Boy, I'm soo glad my fixture was grounded then. ![]() So anyhow, I'm curious if these things can be repaired, because, ... well, $160. (grumble). (More accurately, "$100 USD at last year's dollar conversion" ..) I have no contact info for "Reliable." Trying to do a seach on "reliable electronic" is a nightmare. "Reliable" is a LOUSY search term!!! (grumble). (sigh)
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#7
|
||||
|
||||
![]() From IceCap:
Happen to catch this thread. All IceCap VHO and NO fluorescent ballasts are not potted and are repairable. Andy |
#8
|
|||||
|
|||||
![]() I had 2 of my ballast go on me after just 6 months. I send them back and they sent me 2 brand new ones. They have great service. If they are under 3 years old they probably will repare or replace it for free. It only cost me $16 to ship.
|
#9
|
|||||
|
|||||
![]() I have a 660 and I am having the same problems as Wendell. Did you find out what the problem was with yours? And are they worth fixing? Any info on the 660 would be appreciated.
__________________
I bent My Wookie |
#10
|
||||
|
||||
![]() We are trying a local electrician, hopefully he can help us out. That being said if you have filled out the warranty card, I would just send them back to icecap.
Wendell |
![]() |
Thread Tools | |
Display Modes | |
|
|