|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
#1
09-02-2011, 04:54 PM
|
|||||
|
|||||
Nikon D50 Questions
Hey guys, I have a nikon D50 that I am fairly familiar with the settings on it but I was wondering a few things. What should my settings be like for taking shots under actinic light? Everyone always has such beautiful zoa shots under actinic but when I try, the picture just looks blue.. Barely any color in the coral at all. Any hints?
__________________
120 Gallon Reef With 2 overflows and 35 Gallon Sump. Mag 18 on the Return. Lit by Aqua Light Pro Deluxe. Super Reef Octopus 2000 Skimmer. 81 # LR 28 Gallon Top Down Display Mixed Reef. Radios Pro With TIR Lens Kit 
|
|
#2
09-02-2011, 05:18 PM
|
|||||
|
|||||
|
Change the white balance to
PRE you will see PRE flash in the viewfinder take shots of the sand until you see GD flash in the view finder. You might have to take various shots.. if it doesn't "take" then you will see NO GD in the viewfinder. Once you see GD flashing then you can start taking shots of the tank. You may have to use a higher ISO and I find that you don't want to go above 800 on the D50. You should also make sure you are pulled as far back if you have the kit zoom lens and make sure you are pulled all the way back. You can get away with higher aperture numbers like f11 or f8 if you are using a tripod. I always shoot in aperture priority mode.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
