Upgrade not ready yet and DT skimmer quit!

[shootingstar]

Hi all,
We have started the process for an upgrade to a 6 ft tank, unfortunately we are a few months away from having it online. I decided that once the new tank is up and running I certainly don't want to take it down unless we move so we might as well replace the floor before setting up the new system. Then of course the hubby decided that a basement sump/mechanical was the way to go and well you all know how these things just grow and grow.

Current dilema is the current system. It is a 60 gal cube, the Marineland system that came with a woefully inadequate sump cleverly designed to hold only their skimmer and nothing else. I had already decided that this system was going to get a complete and proper overhaul (new sump/skimmer/plumbing) once everyone was moved to the new system.

Problem is the skimmer died. I can't find any other skimmer that will fit in such a small footprint and low water depth and I know that even if I could buying it seems silly as it will only see a few months of use.

Have been trying to stay ahead with water changes but of course nitrates and GHA are increasing.

Looking for suggestions.......wondering if I could try Prodibio CLEAN, am a little worried about using it without a skimmer

thoughts/ suggestions?

Background - System has been up and running for quite a while, was always stable and healthy, reason for the upgrade was everything grew too well and we are seriously out of room. No SPS, few softy's & LPS. Bioload was low till they grew too big for current system given it is now skimmerless.

Nitrate currently sitting 15-20 since skimmer died. Meaning it will have crept up to 20 and after water change drops.

Will the Bio CLEAN in conjuction with the increased water changes help me manage the Nitrates until we can get the new tank ready?

Can BioCLEAN given that it is a liquid packaged in glass vials be shipped in the winter?? or will the vials freeze and shatter??

[Myka]

What fish do you have in there? The corals won't significantly add to bioload.

[shootingstar]

Originally Posted by Myka

What fish do you have in there? The corals won't significantly add to bioload.

Hi Myka,

Fish:
Sailfin Tang - small
Coral Beauty Dwarf Angel
Tomato clown in a H. Crispa
Harlequin goby
Red Fire Fish
2 x cromis

Inverts:
2 x skunk cleaner shrimp
Coral Banded shrimp
Black Brittle Star
Tuxedo Urchin
assorted snails (Bumblebee, Cerith, Nassarius, Margarita,turbo)
crabs, blue and red leg

Green Hammer
Aussie Elegance
pipe organ
assorted zoas and mushrooms
chalice

It's crowded, I know, hence the upgrade to a much larger tank.
Mostly driven by the tangs need for space down the road and the huge anemone.

[Myka]

I hope you're planning a 180 or 230 for the Sailfin!

What was nitrate at while skimmer was running? I think if you're getting nitrate creep that bad already that you should try to look for a used skimmer to put on the tank. Could you put a hang-on skimmer on the side or back of the tank (instead of in-sump)? If so, try to find a Deltec hang-on skimmer since they hold their price well (they are excellent skimmers) and will be easy to re-sell when you have the big tank set up.

I tried Googling to see what you're dealing with, and I can't find any pictures of the sump. Could you post a link maybe? Or at least the dimensions of the skimmer chamber? SWC Cone skimmers have a really small footprint because of their internal pump, and they are reasonably priced.

[MitchM]

You could buy the skimmer for the 6' tank now and plumb it in if you could remove the old broken skimmer to make room for a pump ....?
Maybe add a carbon reactor too.
Maybe supplement your existing sump with a rubbermaid tub for now?

Originally Posted by MitchM

You could buy the skimmer for the 6' tank now and plumb it in if you could remove the old broken skimmer to make room for a pump ....?
Maybe add a carbon reactor too.
Maybe supplement your existing sump with a rubbermaid tub for now?

+1 on Mitch's idea

you may want to look at a Tunze DOC Skimmer 9011 as it is quite compact for a small sump and will work for 60G

Equipment failing = opportunity for and Upgrade

[shootingstar]

Originally Posted by MitchM

You could buy the skimmer for the 6' tank now and plumb it in if you could remove the old broken skimmer to make room for a pump ....?
Maybe add a carbon reactor too.
Maybe supplement your existing sump with a rubbermaid tub for now?

Mitch,
I am looking at either a Vertex or an SWC for the new tank...neither will fit in the existing sump.

Humm, you got me thinking with the rubbermaid idea, never thought of that really. would have to figure out how the plumbing would work but it might just be the best way to go and I could order the new skimmer now.

any suggestions on how to plumb?

[shootingstar]

Originally Posted by Myka

I hope you're planning a 180 or 230 for the Sailfin!

What was nitrate at while skimmer was running? I think if you're getting nitrate creep that bad already that you should try to look for a used skimmer to put on the tank. Could you put a hang-on skimmer on the side or back of the tank (instead of in-sump)? If so, try to find a Deltec hang-on skimmer since they hold their price well (they are excellent skimmers) and will be easy to re-sell when you have the big tank set up.

I tried Googling to see what you're dealing with, and I can't find any pictures of the sump. Could you post a link maybe? Or at least the dimensions of the skimmer chamber? SWC Cone skimmers have a really small footprint because of their internal pump, and they are reasonably priced.

The new tank is only 135gal but is at least a 6' tank. As much as I am crazy for my critters I am not willing to reinforce the floor, that's a whole new level of crazy...lol. I see this as the way to give the tang some decent swimming room without re-building the whole frikken house for one fish. the house is a 4 level split with the tank on (of course) the top level.

Basement sump (size still to be determined but probably in the 50 gal range)

Nitrate ran 5-10ppm previously when the lame skimmer i had was sort-of working.

Here is a link to the set up I have
http://www.fosterandsmithaquatics.co...m?pcatid=21463

Mine is the 60 gal 2x2x2 with the pro lighting.

The sump is super tiny ( there is a link in the above link to see just the sump) and it slides into the cabinet from the back so I can't change the sump right now without taking the whole system down.

Marineland cleverly designed the sump so that only their skimmer will fit. I had no choice but to use it but it never performed even adequately in my opinion and failed twice in just the first year. I'm not willing to buy another one.

I have looked at what i think is close to every skimmer out there and can't find a solution.....well maybe just maybe the MRC O.F. 100...but having trouble getting accurate info on the foot print.

All I have to work with is 6" x 4".....because of the sump design.

which is why I was trying to find an alternate solution to carry us a few months. when we get the big tank set up this system will get a major overhaul to eliminate these design issues.

[MitchM]

Your nutrients are going to accumulate regardless if all you do is try to replace that skimmer.
I would cut the supply and return pipes, clamp on some flexible hose and set up a rubbermaid tub as a new sump, totally bypassing that existing tiny sump.
Trying to move a tank with nutrient and GHA issues will cause a lot of headaches when you move up to your next larger tank.

[Palmer]

With space being an issue this may not be any better of a solution but you could look into an algal scrubber to remove nitrates instead of a skimmer. They of course require more work and are a bit unsightly IMO if not hidden well. Also if you have access to mangroves I think they are supposed to remove nitrates. Could throw some of those in your sump with a light if you dont have one...

FWIW I dont use any of the above options just food for thought as I see others are using them.