![]() |
#1
|
||||
|
||||
![]() Here is a New Product 28W LED - 13000K
Specifications: Base: E40 (Mogul) Input: 110V AC 60 Hz Total LED Power = 28 X 1W Total Power Consumption: 32 Watts (effciency 90%) CCT = 13000K Life > 50,000Hrs Lumens = 1800 Dimensions = 10" X 4" X 4" The Unit Comprises of 28 - 1W Edison LED. 19 Cool White 6500K and 9 450nm (Actinic). The Lamp Can Replace 100W Metal Halide at 13000K. The Lamps are totally modular, use as many as you need to achieve the desired lighting level. The Lamp swivels to get a horizontal position over the Tank. Last edited by venkiw; 11-01-2010 at 10:42 PM. |
#2
|
|||||
|
|||||
![]() These are street, parking lot replacement lamps meant to be used at 5 to 6 meters. Coverage probably wouldn't be all that good on a tank.
__________________
Do you smell that? Just waaalk away...... sloooowly |
#3
|
||||
|
||||
![]() Yes but they are supposed to be used as a replacement for MH with existing reflectors. The optics is at 77 Degs. Supposed to be at 6" above tank. Also keep in mind that most LED lighting in the market do not have proper design for heat dissipation (i.e. heat sink), and lead to pre mature failures. And no actinics for street light applications.
Last edited by venkiw; 11-01-2010 at 11:32 PM. Reason: missing info |
#4
|
||||
|
||||
![]() I don't have a tank setup at the moment, so any volunteers willing to help with reviewing the product?
|
#5
|
|||||
|
|||||
![]() Help with review? Does that mean buy the ones you just posted for sale?
As far as actinics are concerned, blue leds are not actinics, a true actinic bulb is used in a photocopier and the like. Where is the specs listing 6" above the water? That's pretty vague for a height considering the range of depths for aquariums. Who is the manufacturer of these "reef specific" parking lot lamps? Where did you get them? These just look like a normal led replacement that someone desoldered a few whites and replaced with blues.
__________________
Do you smell that? Just waaalk away...... sloooowly Last edited by Binare; 11-02-2010 at 03:14 AM. |
#6
|
||||
|
||||
![]() i have tried most of the led bulbs out there and the one you have shown will probably fail within a month-you would need a min of 3 watt led -the multiple mini leds do not have enough par(about 2 at 1 inch)
|
#7
|
||||
|
||||
![]() Quote:
The parking lot lamp was modified at my request to include the Cool White which has a full spectrum and also has the 420nm blue wavelength. To add 450nm I included the Edison 450nm Blue to the design. All mods were made at the manufacturers production line. Also note that the layout of the blue LEDs, they form a 'W' which has been my nickname. |
#8
|
||||
|
||||
![]() Quote:
I quit the commercial operations in 2004, I am just trying my hard to have some alternate lighting options for the hobby that don't cost an arm and a leg. |
#9
|
|||||
|
|||||
![]() How is a reflector going to have any effect on these? A reflector will wrap the sides and top of this unit. Are you suggesting to mount the leds pointing up?
Do you have par readings to back your claim at 6"? Pictures showing coverage of your 2'x1' box?
__________________
Do you smell that? Just waaalk away...... sloooowly |
![]() |
Thread Tools | |
Display Modes | |
|
|