Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Product Review and Equipment Forum > Pump Specific

Reply
 
Thread Tools Display Modes
  #1  
Old 08-06-2010, 08:05 PM
Madreefer's Avatar
Madreefer Madreefer is offline
Member
 
Join Date: Nov 2008
Location: Prince George
Posts: 2,064
Madreefer is on a distinguished road
Default Vortech MP40es Questions

So I ordered one of these from Ocean Aquatics. I have a 144G half circle tank. Right now there is 3 Hydor #4's in the tank. Will one MP40 do the trick and anybody with a bow front or circle tank care to post any input on results? And those with odd ball shaped tanks have any suggestions on placement?
Reply With Quote
  #2  
Old 08-06-2010, 09:11 PM
Sunee Sunee is offline
Member
 
Join Date: Sep 2009
Location: Edmonton
Posts: 158
Sunee is on a distinguished road
Default

The Eco Smart manual is available on line and it has a section on suggested placement of the pump for various tank shapes. Naturally they suggest two - a master and a slave. I am still waiting for my pumps so have no personal experience on placement but I expect someone else will chaime in with their placement and how they work. Good luck!
Reply With Quote
  #3  
Old 08-06-2010, 09:17 PM
Zoaelite's Avatar
Zoaelite Zoaelite is offline
Member
 
Join Date: May 2007
Location: Calgary
Posts: 2,461
Zoaelite is on a distinguished road
Default

I'm running a single MP 40W on my 170g 6', it creates a very dramatic amount of flow but I will be purchasing a second one shortly. Ditch the korellias ASAP, Vortec is the way to go!
Reply With Quote
  #4  
Old 08-06-2010, 09:30 PM
viperfish's Avatar
viperfish viperfish is offline
Member
 
Join Date: Aug 2009
Location: Dawson Creek
Posts: 684
viperfish is on a distinguished road
Default

I bought my MP40w ES last week. My tank is 150 Gal 48x30x24" tall, I was running two K4's and two Evo 1400's. I pulled the two K4's and I am currently running a single MP40 and I have the two Evo's connected to my Apex controller as a wavemaker. I will probably add a second MP40 eventually but for now it's doing a great job of moving water. If I put mine on short pulse mode it creates quite a wave across my tank... very impressive. I have been running mine on reef crest mode pretty much full time only to put it on short pulse when I want to show off, LOL. There are certainly a ton of more options when running two MP40's but a grand for two pumps is a lot to swallow at once.
Reply With Quote
  #5  
Old 08-06-2010, 10:14 PM
mike31154's Avatar
mike31154 mike31154 is offline
Member
 
Join Date: Jul 2008
Location: Vernon
Posts: 2,073
mike31154 will become famous soon enough
Default

Can't help with advice on placement in an odd shaped tank, my 77 is your standard rectangle so I have one MP40W ES at each end. I can pretty much assure you though that a single VorTech will be insufficient for most applications on a tank your size. You'll need to continue to supplement flow with several of your other pumps until you decide on a second VorTech. In addition, purchasing a wireless capable pump and not using the full features offered by the wireless control capabilities by having a second pump, would be a waste of money. The features and options with two or even three of these is mind boggling, almost too much to wrap your head around.

Due to the cost, I started with a single MP40W several years ago, just before the Gen 2 upgrade. I managed to snag a good deal on a second new one (Gen 2) from a fellow reefer on another forum who had a change of plans about a year after my initial purchase from J&L. A few bucks to upgrade the original to Gen 2 and I was away to the races. And of course a few months ago, I ordered a couple of the ES drivers to get the added features provided by the latest upgrade.
__________________
Mike
77g sumpless SW
DIY 10 watt multi-chip LED build http://www.canreef.com/vbulletin/showthread.php?t=82206
Reply With Quote
  #6  
Old 08-07-2010, 12:56 AM
Madreefer's Avatar
Madreefer Madreefer is offline
Member
 
Join Date: Nov 2008
Location: Prince George
Posts: 2,064
Madreefer is on a distinguished road
Default

Thanks for your info guys. I'm looking forward to getting the powerheads out of my tank. Number one reason I chose to get the vortech over a aquacontroller. I'll get that later. I can always tell my wife that I cut one of my Hydors in half and put the motor on the outside.
Reply With Quote
  #7  
Old 08-07-2010, 03:04 AM
mike31154's Avatar
mike31154 mike31154 is offline
Member
 
Join Date: Jul 2008
Location: Vernon
Posts: 2,073
mike31154 will become famous soon enough
Default

Pretty sure once you get that bad boy in your system, you'll be scheming for the second, possibly even third.... The great thing about them is that you can also get an MP10W ES to work with the big guys. Getting all those 120V ac electrical cords from the other powerheads out of the water is another bonus.
__________________
Mike
77g sumpless SW
DIY 10 watt multi-chip LED build http://www.canreef.com/vbulletin/showthread.php?t=82206

Last edited by mike31154; 08-07-2010 at 03:09 AM.
Reply With Quote
  #8  
Old 08-17-2010, 07:58 AM
Madreefer's Avatar
Madreefer Madreefer is offline
Member
 
Join Date: Nov 2008
Location: Prince George
Posts: 2,064
Madreefer is on a distinguished road
Default

Well after having this thing on for a few days now I really like it. I did end up keeping one of my Koralia's in the tank. The 2 together are working great. I will end up getting another one later on. I have been running it on Reef-Crest mode and having the Night mode come on at 9:00. Is the night mode supposed to be on for 14 hours? Becuase mine does not stay on for that long at all.
Reply With Quote
  #9  
Old 08-17-2010, 03:24 PM
Sunee Sunee is offline
Member
 
Join Date: Sep 2009
Location: Edmonton
Posts: 158
Sunee is on a distinguished road
Default

Have you changed the night mode time to 14 hours in the configuration? The manual says the default time for night mode is only 10 hours, you have to change the configuration if you want it longer.
Reply With Quote
  #10  
Old 08-17-2010, 03:28 PM
Madreefer's Avatar
Madreefer Madreefer is offline
Member
 
Join Date: Nov 2008
Location: Prince George
Posts: 2,064
Madreefer is on a distinguished road
Default

Quote:
Originally Posted by Sunee View Post
Have you changed the night mode time to 14 hours in the configuration? The manual says the default time for night mode is only 10 hours, you have to change the configuration if you want it longer.
It does'nt even mention night mode in the manual I got with it. I read how to put it in to night mode on the net somewheres. Whats with these manufactures? Every gadget I seem to buy for my tank has crappy instructions or none at all.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 02:33 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.