![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]() so I found out that over the last week my tips are not coloring anymore, and in my monty, the color in the center is fading as well,
cant find any bugs, have bin bihind the glass for a while checking Last edited by KevinK; 12-08-2010 at 08:42 PM. |
#2
|
|||||
|
|||||
![]() I too am battleing the same thing. I am currently pursuing the "I shouldnt have changed salt" theory. Really it can only be related to either/or Lighting, Pests, or water quality. Find out which one(s) it is and you have your problem solved. I have currently been working on mine for 2 months now
![]()
__________________
![]() |
#3
|
||||
|
||||
![]() interesting, as I have not added new products, nore changed salt / lights
|
#4
|
|||||
|
|||||
![]() Post some info about your system and we will try to help you out.
__________________
![]() |
#5
|
|||||
|
|||||
![]() Quote:
![]()
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |
#6
|
|||||
|
|||||
![]() I battled something similar that got progressively worse for months. I checked everything and finally found out it was stray voltage. I had even checked with a volt meter but that didn't read anything. Figured it out when I stuck a cut finger in the tank.
To make a long story short, I replaced the heater that was leaking electricity and added a ground probe for good measure and had polyp extension again within 12 hours. Corals are now doing great and even a few that i thought were goners have come back. |
![]() |
Thread Tools | |
Display Modes | |
|
|