|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
sapphire skimmer problem
I finally got water my 34 gal solana. When I pug in the sapphire skimmer that was made for this tank, it bubbles up and over flows lifting the collection cup lid up. Is this just because it is new and needs to break in or is there another problem. Anyone have any ideas? Thanks
|
#2
|
|||||
|
|||||
Turn your power head down you are putting to much water through
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. |
#3
|
||||
|
||||
No ph on right now, just pump that came with the skimmer and the one that came with the tank.
|
#4
|
|||||
|
|||||
What water conditioner(if any) are you using?
__________________
96" x 16" x 16"//106g Skimmerless Reef, Established Jan. 13, 2012 |
#5
|
||||
|
||||
RO/DI water, I let salt mix in mixing container for 24 hrs. filled up tank with new saltwater,(took 2 days to get enough mixed water to fill tank) plugged in and had this problem right away. Tank have been running for 3 hrs now and not change.
|
#6
|
|||||
|
|||||
I thought it might have been a conditioner you may have been using. I had the same problem with my skimmer when I started up my first salt tank.
I think you'll just need to keep playing with it and tweaking the adjustment.
__________________
96" x 16" x 16"//106g Skimmerless Reef, Established Jan. 13, 2012 Last edited by noirsphynx; 03-03-2010 at 08:29 PM. |
#7
|
|||||
|
|||||
Have a look at this link http://justmyreef.com/index.php/2009...-nano-skimmer/
__________________
96" x 16" x 16"//106g Skimmerless Reef, Established Jan. 13, 2012 |
#8
|
||||
|
||||
Quote:
2010-01-22: Mesh Wheel Issue – New Wheel Efficiency Solution When I replaced the mesh wheel with the new and improved version which became available at the beginning January, the mesh wheel was too efficient causing skimmer to overproduce bubbles causing skimmer cup to fill instantly. A solution has been identified and installed which appears to have resolved the issue. By placing an airline 2-way valve inline of the pump’s air intake and before the air silencer, fine tuning is possible correcting problem. 2010-02-06: Final Word With the new mesh wheel and the 2-way valve to fine tune, this skims excellent! Bad news, Sapphire Aquatics has officially went out of business which is a huge loss to the nano market. I will try this and hopefully it will work. Last edited by MrsBugmaster; 03-03-2010 at 09:01 PM. |
#9
|
||||
|
||||
Ok, I went out and bought a $1.50 2-way airline value and installed it right before the silencer and it seams to have solved the problem! I may have to tweak it a little after its broke-in but so far so good.
|
Thread Tools | |
Display Modes | |
|
|