![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||||
|
|||||
![]() 2 x tunze 6100 pumps $150/each or
dart pump $150 2 x wavy sea $100/each or $150 for both 265 gallon tank, center overflow, 84"L x 30"H x 24"W, 'wave' stand, matching cap, 75 gal custom built sump $4000 2 stage marine tech calcium reactor half full of media, 10lb co2 bottle with azoo regulator $400 GHL 4 fan $100 Last edited by niloc16; 10-13-2009 at 01:34 AM. |
#2
|
||||
|
||||
![]() What is the wattage of the ballasts and would you ship?
|
#3
|
|||||
|
|||||
![]() sorry i just edited the post, the ballast are 400W and the pendants can be used as 250 or 400w, the socket is adjustable.
i would ship at your expense |
#4
|
||||
|
||||
![]() I was reading up on your tank that by the way is an excellent looking tank but noticed under the description for the tunze pumps you came up with a way of implementing it with the wavy seas how did you do this !!! Thanks
|
#5
|
|||||
|
|||||
![]() thanks. i cannot take the responsibility for that mod. superfudge (marc) came up with that idea on his system and i copied it. i wrapped the shaft of the wavy sea in plastic wrap (folded in half three times and then wrapped around shaft twice), this creates a stronger seal on the oring, then used a 1" pvc cap with center drilled and tapped to accomodate a plastic bolt. then with the bracket that comes with the tunze i used the plastic bolt to mount it to the cap.
|
#6
|
|||||
|
|||||
![]() ...
|
#7
|
|||||
|
|||||
![]() Do the fans come with the fan controller as well?
|
#8
|
|||||
|
|||||
![]() i might have the controller somewhere but it would not be included in the price
|
#9
|
||||
|
||||
![]() I assume that the lights are all 400W then if the ballasts are 400W?
|
#10
|
|||||
|
|||||
![]() the pendants are adjustable for 250w or 400w applications
|
![]() |
Thread Tools | |
Display Modes | |
|
|