Pump/Plumbing question...

[Whatigot]

Howdy all.
I am about to pick up a quietone 6000 that has a 1' outlet but my in situ plumbing is 3/4'...


Is this doable or no no?
what effects will this have?

thanks kindly.

[albert_dao]

You can do it, but you will get reduced flow due to the internal friction of the reduced diameter.

[Whatigot]

meaning same amount of water being pushed through a smaller diameter than what pump is rated at will make for less GPH?

Any idea on the percentage loss?

Thanks Albert....

[sphelps]

If my rough calculations are even close to correct you'll probably get about 120% more head pressure ultimately meaning about 75% less flow. That's comparing 3/4" pipe to 1" pipe. But it really depends on your pipe network more than anything.

I would re-plumb to 1.25" pipe, that should give you even more flow than the 1".

[Whatigot]

I won't replumb.
Just put the plumbing in in the first place and the pump I am upgrading from is so far inferior to the quiet one 6000 that I think I'll still come out on top.

Good learning experience in any case just to see.

Just out of curiosity, what IS the math behind that 75% loss Phelps?

[sphelps]

Originally Posted by Whatigot

what IS the math behind that 75% loss Phelps?

Complex iterations to solve for the pipe friction coefficient and then a little bernoulli, but to be honest I can't remember exactly how to do it anymore I just happen to still have the program in my old calculator I think my fluid mechanics days are behind me now, well I hope so anyway.

[sphelps]

I also just remembered about the RC head loss calculator, that would have probably been easier.

[Whatigot]

whoah, you speak klingon?

lol

I appreciate the help Phelps, glad someone on here is smart enough to answer these questions for me.

[Whatigot]

calc says I'll still have 811 GPH, plenty for me but a huge loss from the 1500 it has at 0 head....
Knew there was a calculator somewhere....

[MikeP]

Don't forget about how fast your tank's overflow drain is. I have a quietone 6000 on my tank but had to "T" it off to reduce flow cause my drain bulkhead would never keep up otherwise. Great pump choice IMO, not that I have lots of experience with other pumps but the quietone has been working great on my tank for the last year and a half.

HTH