|
|
|
#2
05-12-2008, 02:03 PM
|
|||||
|
|||||
I'm running one on my tank. It seems to work pretty well if you set it up following their instructions. I'm feeding it with a Mak-4 pump, which they say is a bit big and may need to be throttled down with a ball valve on the inlet. I'm running it at full capacity and it seems to be OK. I think there may be better skimmers available, but this one works pretty well for the cost. I had the pump all ready, so that was a factor for me choosing it. If I was needing a complete new set up, I might considered other choices.
__________________
I retired and got a fixed income but it's broke. Ed _______________________________________ 50 gallon FOWLR, 10 gallon sump. 130 gallon reef, 20 gallon sump, 10 gallon refugium. 10 gallon quarantine. 60 gallon winter tank for pond fish. 300 gallon pond with waterfall. 
|
|
#3
05-12-2008, 02:16 PM
|
|||||
|
|||||
|
I ran one on my 45 upstairs before I switched to a Deltec 300. It worked just fine. The only reason I got rid of it is I didn't like the looks of the pump sitting in the tank.
__________________
250 gal display tank plumbed directly to my wallet
|
|
#4
05-12-2008, 11:17 PM
|
||||
|
||||
|
thanks guys im just wondering cause of cost and things im running a 220 gallon tank and im wondering if i should order one thats rated for a lot more than the aqua c however i only have 29" of room under my tank so that is also a factor
|
|
#5
05-13-2008, 01:37 AM
|
||||
|
||||
|
Skimmer makers always over-rate their products so make sure you go bigger than you need to in order to handle the bio-load. Especially on a tank like yours with so many fish. Maybe an Aquamedic 5000 shorty?
__________________
Mark...  290g Peninsula Display, 425g total volume. Setup Jan 2013.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
