110g Mixed Reef V2

[fishytime]

Its happened again. My reef tank is growing. I started my salty life with a wee 20g, that only took about 7 months for me to upgrade to a 68g. And now the 68g will soon be upgraded to a 110g(72"lx20"tx18"d). This build will be almost entirely a diy project. The tanks I will be using were built and the equipment will and has been purchased, but the rest of the build I will do my self. The 110g I have had for three years running as a fresh water setup. First with cichlids then as a big community tank. Heres what I have and am planning to do. 110g display with a 55g sump/ refugium. The 110 was not drilled and did not have an overflow. The display will have dual corner overflows with 1" herbie style standpipes drilled through the bottom. The returns are 2, 3/4" drilled through the back, fueled by a Quietone 6000. This journal will be pic intensive, so here is a few shots of the "birth" of my new baby. Sorry if some of them are a bit blurry, but I was still shakin from drilling the tank myself (with Zylumn/Kevins help and encouragement...thanks again Kev btw).First time drilling glass.

[fishytime]

I got the sump finished tonight. Well... I finished it yesterday , but I leak tested the baffles tonight and....IT HOLDS WATER . Cutting the glass for the baffles actually proved to be way harder than drilling the tank. I just could'nt get the glass to break cleanly on my scribe. So I broke out the trusty beltsander to grind down the wonky cuts.The following pics show the sump and a couple of the goodies to go in it. The layout is; skimmer/drain section on the left, return pump section in the middle, and drain/refugium section on the right.If you guys see any issues with this design PLEASE let me know. This is my first sump and I wanna get it right. The return pump is a quiet one 6000, and the skimmer is a euro-reef rs135.I need to do the overflow box inside the tank, but I think I will leave the cutting of that glass to the experts. 3/16" glass was hard enough, never mind the 3/8" glass I will need for the overflow. Then after that is the plumbing. I am a carpenter by trade so wood is really my thing. But I am learning lots and I think I have a handle on how the plumbing needs to be.

[Ya Dude]

cool

[Delphinus]

Great job so far!

[fishytime]

Thanks Tony. Seems like a small project compared to what you've got in the works.

[Zylumn]

Great job on the sump. Looks like its coming together.
Kevin

[fishytime]

Thanks Kev(again). Its been kinda slow going lately as I am in the process of moving at the end of the month. I've been sneaking away from my packing duties every once in a awhile to get my plumbing parts together. I think I've finally got what I need. I ordered a few things from B.C. because a buddy was making a huge plumbing order and said I could piggy back on his order to save shipping. I got the stuff from him last week and figured out right away that I needed to go back( again) to the plumbing store. I am still waiting on the gate valves from a different order(picking them up tomorrow). But I thought I would share what I did today. Here is what the stack of parts for the return look like.

Before.




After.







The return goes from the 1" output of the pump to a ball valve by 1" flexible tubing. Then is reduced to 3/4" hard pvc . First a check valve, then a "T", then a ball valve for each return, bulkheads and finally through the locline.

[fishytime]

More pics

[Zylumn]

Its movin right along.

[Alberta-newb]

Looks great so far I really like your sump set-up. So how quiet is your Quiet One and do you like it? Curious as I have a 6000 on order for my 120 build and not a 100% sure it was the right choice or not.

Francis "Alberta-newb"