![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]() I'd really like an anemone, just wondering if my tank can handle one. I've got a 67gal, 60lbs LR. The tank's been running since the end of last October. After the cycle I've never had any fluctuations in the water conditions. Ammonia, Nitrate, and nitrite are all 0, pH is 8.0, SG 1.024. I currently have 2 perc clowns and a yellow tang. I just have 2 frags, no other corals. So will an anemone thrive in my tank?
__________________
~Jessica |
#2
|
||||
|
||||
![]() Your tank should be ready at 8 months & stable. How's your lighting though? (very high PC or MH really) Anemones have high lighting requirements. Would recommend that you look for a tank-raised clone from another reefer rather than a wild-harvested from a LFS because clones tend to do better than wild-caughts. What species are you looking at? LTAs & BTAs tend to be the easiest clownfish hosting anemones to keep.
JME & JMO, Anthony
__________________
If you see it, can take care of it, better get it or put it on hold. Otherwise, it'll be gone & you'll regret it! |
#3
|
|||||
|
|||||
![]() Yeah you should be good to go as long as you have good lights. I have heard of people putting them in much sooner and having them thrive, so I say go for it.
__________________
65 Gallon, 30 Pounds of LS, 60 Pounds of LR, 1 Clown, 1 Three Stripe and 1 Blue Damsel, 1 Six Line Wrasse, 1 Blue Tang, 2 Cleaner Shrimp, 1 Pincushion Urchin RBTA, Toad Stool Leather, Finger Leather, Bubble Coral, Candy Cane, Xenia, and Green Star Polyps |
#4
|
||||
|
||||
![]() I've got PC lighting, 2 actacids and 2 10000K. I was thinking a BTA, I'll look around for a tank-bred one rather than wild caught. Any ideas where I'd find one of those?
__________________
~Jessica |
#5
|
|||||
|
|||||
![]() Quote:
![]() |
#6
|
|||||
|
|||||
![]() So two 10k and two actinic in a 36 inch light? That would be 96 watts x4 bulbs right? 384 watts should be enough for BTAs or even a sebae.
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#7
|
|||||
|
|||||
![]() Quote:
I don't think PC lights would cut it for it either. IMO the only anemone that can be housed relatively well under PCs would be a BTA. |
#8
|
||||
|
||||
![]() 96w PC are pretty good, especially impressed with Panasonic bulbs. But it they're 65w bulbs, those don't really give very intense lighting I find. Could you post tank size & light wattage. Also, the 10000k is great but the actinic is sorta useful but more for aesthetic appeal so I wouldn't count on the actinics to add too much towards the light total.
Anthony
__________________
If you see it, can take care of it, better get it or put it on hold. Otherwise, it'll be gone & you'll regret it! |
#9
|
|||||
|
|||||
![]() I'm at about the same timeframe and conditions for my tank, are the rose tips easy to take care of under MH?
__________________
"what do you mean you need another tank??" |
#10
|
||||
|
||||
![]() I don't agree with getting an anemone now.
It is not so much the time frame but the amount of corals you have in your tank. I would suggest getting some more experience with different types of coral. Make some mistakes with various corals and learn from them, the way we all learn by experience. Then when a few more months have gone by an anemone will be easy to take care of. I got an RBTA too early, it crawled down my drainpipe and died in the sump. Then after waiting several more months I got an RBTA in December which is thriving now. When you do get an anemone I strongly suggest a BTA which is generally acknowledged to be the most hardy anemone. IMO other types of anemones are best left to anemone experts. |
![]() |
Thread Tools | |
Display Modes | |
|
|