Led setting blue color ?

[2bafish]

So I just bought 3 LED units to replace my 250 watt halides. I really like the blue look. I turned down the whites to 20% and blue at 100. The questions is will this affect growth or do any harm to the corals?? I only have lps, softies and a few RBTA. I know blue is used allot by corals but the halides were so bright compared to this setting.

[Skimmer Juice]

I usually avoid running my leds at %100 my maxspect I max out at %90 . As for spectrum I run my kessils at %100 blue and almost full power , my maxspect I run at %90 blue %30 white for the peak cycle. Keep a mix reef with sps , lps, nems, zoas I get good growth and excellent color . And its pleasing on the eyes so my only concern with switching your lights is acclimating your corals to the switch . Led lights look darker but put out alot of power so I would keep an eye out and lower your % on the led until your corals adjust to the switch . If everything is adjusted already disregard what I just said lol

[2bafish]

Originally Posted by Skimmer Juice

I usually avoid running my leds at %100 my maxspect I max out at %90 . As for spectrum I run my kessils at %100 blue and almost full power , my maxspect I run at %90 blue %30 white for the peak cycle. Keep a mix reef with sps , lps, nems, zoas I get good growth and excellent color . And its pleasing on the eyes so my only concern with switching your lights is acclimating your corals to the switch . Led lights look darker but put out alot of power so I would keep an eye out and lower your % on the led until your corals adjust to the switch . If everything is adjusted already disregard what I just said lol

Thanks for your input. The corals are acclimating good. I upped the white spectrums a bit.