![]() |
#1
|
|||||
|
|||||
![]() I have been looking at recharging my own di resin. Here is an artical I came across.
http://reefkeeping.com/issues/2008-09/nftt/ I have about 10 pounds worth of resin. Some used some been recharged by someone else. Worth a try I'm thinking. I would keep the two resin types separated after the process. Let me know what people think about it.
__________________
_________________ Mike. ![]() |
#3
|
|||||
|
|||||
![]() Quote:
availible at your local rona (hydrochloric acid = muriatic acid) which is used for controlling ph in pools and cleaning concrete etc and caustic soda aka lye is also easy to get locally |
#4
|
|||||
|
|||||
![]() So far I have found muriatic acid at rona. 4L for $15
And Lye crystals (sodium hydroxide) at home hardware 3KG for $24. Everything else is just containers and such.
__________________
_________________ Mike. ![]() |
#5
|
|||||
|
|||||
![]() the article says the acid wash is optional but i'd probably do it as well. make sure the stuff is working as close to new as possible.
what were the lye crystals sold as? do you have a picture of the container? |
#6
|
|||||
|
|||||
![]() This is what I found. I have not tried purchasing it yet though.
http://www.homehardware.ca/en/rec/in...I3226431?Num=0
__________________
_________________ Mike. ![]() |
#7
|
|||||
|
|||||
![]() remember it calls for high quality HCL or recharging exchangers, buy cheep stuff and don't expect the best job.
most stuff you can get at the hardware store is very diluted also. Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#8
|
|||||
|
|||||
![]() Good call to check the concentration. Will have to see what % that one is. I was doing some reading and I guess a standard concentration is 32%. After that its an industrial strength and is harder to find.
__________________
_________________ Mike. ![]() |
#9
|
|||||
|
|||||
![]() Quote:
Steve
__________________
![]() Some strive to be perfect.... I just strive. |
![]() |
Thread Tools | |
Display Modes | |
|
|