|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Increased nitrite in QT
So I have a 10gal QT with a sponge and ceramic bio cylinder type material in the filter (was running a week or so in my DT so help jump start the bacteria prior to putting it on my QT). I test my water daily and cycled tank with water from my DT. Water changes done weekly with freshly mixed water. About a week or so after setting up purchased chromis, a firefish and a diamond goby. Only lost one chromis to abuse? Otherwise the rest look well. I noticed end of last week my nitrite levels have been increasing but everything else remains good.
Temp:74, sal:1.025, kh: 8, ca:360, no3:0, ph:8.4, PO:0, nh:0 I was doing 10% changes daily which did nothing and then started doing 50% daily still with no major drop. I feed once a day of flake food. Tank is all glass with a few plastic pipe pieces that was boiled to sterilize. Anyone have any tips to help reduce my nitrite? After my water change (50%) I got 0.25. Help? |
#2
|
|||||
|
|||||
If there was no change at all after a 50% change, I'd try another test kit.
__________________
Brad |
#3
|
|||||
|
|||||
Also if you're talking about nitrite then it's probally cycling, since you should only be reading nitrate with fish in the qt. I believe nitrite is not good for fish. You should run a hob filter to help speed the cycle.
__________________
Always looking for the next best coral... 90g starphire cube/400mhRadium20k/2 XHO/2x27w UV/2x39w T5/ 3 Trulumen led strips |
#4
|
||||
|
||||
Yeah I am currently running a AC30 with the carbon removed and just the foam and the bio ceramic type material. Had it running on my DT for a week prior to putting it on my QT. will go grab a new test kit and see what my reading comes back at. Until then, daily 1-5g changes
|
#5
|
||||
|
||||
I wouldn't worry about nitrite or nitrate in a fish only QT. Nitrite/Nitrate are not toxic to marine fish unless the level is very high(>100ppm).
IMO you should monitor ammonia regularly in a QT. Get a good ammonia test kit and/or seachem ammonia badge. |
#6
|
||||
|
||||
+1 on the ammonia badge. I use two in my tank transfer method of QT
|
#7
|
||||
|
||||
Already got the ammonia badge going.... Which is showing "safe" and my API test is showing 0. My nitrite is still .50-1, LFS recommended some
Bottled stuff (Prime and bio boost) so lets see how this works... |
#8
|
|||||
|
|||||
The Ammonia Alerts works really well, but don't rely on them for an actual reading. I've found the measurements they show are often 1/10th of the actual amount of ammonia in the water. Best practice is to dose an ammonia detoxifier as soon as you see ANY color change on the alert.
Quote:
You currently have enough bacteria that convert ammonia to nitrite, but the bacteria that convert nitrite to nitrate are not abundant enough. Just keep monitoring ammonia. |
#9
|
||||
|
||||
Here is a good article on nitrite in a reef:
http://www.reefkeeping.com/issues/2005-06/rhf/ As has been said, nitrite is not as toxic as in fresh. I am quarantining right now (first time for me) and have been watching ammonia real close. Nitrite and Nitrate are higher in my qt tank - seems to be going ok so far. |
Thread Tools | |
Display Modes | |
|
|