Grizz's 8' - 300 gal + 60 gal + 30 gal OMG Build!!

[Rice Reef]

This is gonna be one awesome build. Subsribed!
When you come over to the island for a visit let me know... I could certainly use your skillz in organizing all my wires and gadgets!

[BackPackHunter]

Originally Posted by The Grizz

Now there's an idea

Need to pick up a 2" stroke actuator & see if i can build a locking system for all the doors as well to keep the grandsons out of the sump area.

looking really good Grizz
I have enough locks (like the ones used at a fish store to keep people from putting there hands in the water)
you can have as many as you need. just let me know

[StirCrazy]

Originally Posted by The Grizz

Now there's an idea

Need to pick up a 2" stroke actuator & see if i can build a locking system for all the doors as well to keep the grandsons out of the sump area.

in my old shop I made a quick and dirty one to try it out. I just used a high torque stepper motor with a cam plate, ran a 1/2" rod the length of the cabinets, has a little "J" welded to the main rod at each door that would slide into a eye bolt, and I supported the rod every now and then with a set of sealed bearings that I pressed some pulley rings on to. was board at work and spent about 8 hour on the lathe making those. if you use an actuator, and a similar design make its a spring open or fail open or normally open, and actuate to close other wise if your power goes out your doors stay locked.

Steve

[The Grizz]

Originally Posted by Rice Reef

This is gonna be one awesome build. Subsribed!
When you come over to the island for a visit let me know... I could certainly use your skillz in organizing all my wires and gadgets!

Thanks RR but I think the only way I am going to get to the island is on the bike cause the ferry cost are INSANE!!

Originally Posted by BackPackHunter

looking really good Grizz
I have enough locks (like the ones used at a fish store to keep people from putting there hands in the water)
you can have as many as you need. just let me know

What kind of locks are they? I dont want anything on the exterior to take away from the clean smooth look, thats why I am thinking of an internal actuator.

Originally Posted by StirCrazy

in my old shop I made a quick and dirty one to try it out. I just used a high torque stepper motor with a cam plate, ran a 1/2" rod the length of the cabinets, has a little "J" welded to the main rod at each door that would slide into a eye bolt, and I supported the rod every now and then with a set of sealed bearings that I pressed some pulley rings on to. was board at work and spent about 8 hour on the lathe making those. if you use an actuator, and a similar design make its a spring open or fail open or normally open, and actuate to close other wise if your power goes out your doors stay locked.

Steve

I thought of the power outage thing already, I have 2 large battery back ups going in the system & going to buy a couple more as well.

[BackPackHunter]

[quote=The Grizz;867134]
What kind of locks are they? I dont want anything on the exterior to take away from the clean smooth look, thats why I am thinking of an internal actuator.


They are about the size of a loonie , but you would see them , n need one for every door, I'll post a pic in the morning....
Could be a plain B if they actuator is a pain in the butt...

[sphelps]

Why not just use regular child locks like the rest of us?

[The Grizz]

Originally Posted by sphelps

Why not just use regular child locks like the rest of us?

BORING!!!

[The Grizz]

Top cabinet face panel's and door's are on, amazing I even have the energy to get anything done on the tank after a 12 hr day in the shop.

[lockrookie]

Did you see the electronic locks I used on my 180 I got them on eBay MSG me if your interested bud and ill show you how to make it with a back up battery in case of power outage

[sphelps]

Originally Posted by The Grizz

BORING!!!

Perhaps but effective. Think about all the time you could save and spend with the family...



And yes I did just get my nails done.