|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
Trying to pick the right return pump
OK...I'm looking for the right reurn pump......75 gal FOWLR tank and a 30 gal sump.
How much flow do you guys think i should go for? I was thinking 700 to 800 GPH,but was told that might be too much with a 30 gal sump. Herbie style overflow,with 2 x 1 1/2 inch bulkheads Probably going with 1 of these http://www.aquacave.com/eshopps-psk-...tank-2859.html Any thoughts? Any help would be welcomed. Thnx in advance Doug
__________________
Doug |
#2
|
|||||
|
|||||
Doug you provided a link for a skimmer.
__________________
360 gallon sps reef, 180 gal sump, bubble king supermarine 300, 4xmp40Wes, 2 x 6215 tunze waveboxes, 4 ghl mitras 360 Reef Tank |
#3
|
|||||
|
|||||
I know....I thought that what type of skimmer might help decide the flow.
maybe I'm wrong about that. This is the pump I had in mind http://www.jlaquatics.com/product/wp...ater+Pump.html
__________________
Doug |
#4
|
|||||
|
|||||
Well some people are hardcore with that saying that not to do more then the skimmer can handle. I am more of the biggest you can fit then throttle it back
__________________
360 gallon sps reef, 180 gal sump, bubble king supermarine 300, 4xmp40Wes, 2 x 6215 tunze waveboxes, 4 ghl mitras 360 Reef Tank |
#5
|
|||||
|
|||||
Quote:
the more flow you can get here means fewer powerheadsd in the tank. at least IMO
__________________
72 Gallon Bowfront Reef.. Hardware:2x250w Luminex Elite HQI Reflectors (Phoenix Hexarc Bulbs), Galaxy 2x250w Electronic ballast, Euroreef 130 Skimmer, Sedra KSP 7000 Retern... Live Stock: Pair of Hawaiian Flame Wrasse, Leopard Wrasse, Pink Streaked Wrasse, Pair True Percula Clowns, Potters Angel, African Flameback Angel, Orange Fin Tomini Tang, Yellow Assessor, Tailspot Blenny, Purple Firefish.. 45 G FW Asain Barb Community tank. |
#6
|
||||
|
||||
I have a 75G with 30G sump, herbie with 2 1" bulkheads. I run a mag 9.5 full out. that would likely be 7-800gph. seems to work fine.
|
#7
|
|||||
|
|||||
Quote:
I'm also a fan of large turnover, a 75 gallon with that kind of drain can handle a very large turnover without causing problems relating to noise and micro bubbles. The only source of bubble problems would be from the skimmer, if the skimmer releases a lot of micro bubbles a higher flow rate through the sump may cause them to bypass bubble traps/baffles. However proper design and sump layout can avoid this quite easily, and choosing a skimmer which doesn't exhaust a large amount of bubbles is always a good idea. Skimmers which use diffuser plates and have larger diameter bodies typically do better at containing air bubbles. I'd aim for at least 1000gph turnover, if you can go a little higher and hit a 15x rate at 1125gph even better. However hitting such a number isn't always desirable as typically you need to run larger external pumps which can create more noise. Usually you have to spend quite a bit to get a quiet pump capable of such a flow rate so this whole pump selection may be based on your budget. What is your budget? |
Thread Tools | |
Display Modes | |
|
|