![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]() Hi! So many ways to do it, I ran a filter for years no problem what so ever and am guilty
of not cleaning faithfully always. I used Ehiem Pro II can and used the media that came with the filter. In having recently taken off all filters it is way easier IMO. The filter was such a hassel and I will never go back. I did start with them though and don't know any different, hangover from freshwater days. It was a huge plunge to take them off and I watched everything like a hawk...expecting some slight change but nothing, wish I had done it years ago. How big is your tank? Did I miss that. Just take it all slowly and follow the advice from here as it is great. And remember there is no one way so you have to really decide and just go for it. When I first started I had the L.F.S only for info, did not know about Canreef and I managed. So good luck and keep us posted and ask questions galore!!! It is addicting so beware, hehe!!! Opps almost forgot get and use a skimmer for sure if you can't get both then only get the skimmer. Leah |
#2
|
|||||
|
|||||
![]() Quote:
When I first set up the tank (purchased used) the Rena canister came with it and the previous owner had ceramic media in it and not much else. Being a newb I read the instructions for the filter and proceeded to get all the 'proper' filter media to put in there, foam pads, more ceramic, plastic media, etc. etc. It really did get to be a pain to clean properly and after reading a little more on line, on forums such as this, I realized that it's best to run the thing empty, except for a bag of carbon. This is working well so far and after more than two years after setting up, my nitrates are undetectable. I must note, however, that from about the 7 month mark to 1.5 years after set up, I battled elevated nitrates. Also noteworthy is that there was virtually no change to these levels after I removed all the media from the canister. No matter what I tried, nitrates would return to between 20-40 ppm within days of a 30% water change. Therefore, in my particular case, I do not consider my canister to have been a 'nitrate factory', any more than my live rock. I really have no definitive answer as to why my nitrates are currently undetectable, my theory is, the tank has simply matured to the point where things are taking care of themselves in that regard. I also suspect the addition of first one and recently a second VorTech MP40W has contributed to cleaning up the nitrates. The greatly improved flow from these pumps is making life a lot easier. So, based on my experience, by all means run a canister if you wish, but avoid filter pads, run it empty. For sure get a protein skimmer, even a crappy one will at least provide oxygenation, although you should be able to get a very good used one for a reasonable price, if new is too costly. Even if you are going FOWLR, don't skimp on the pumps for flow, it will aid the live rock in the filtration process.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build ![]() |
#3
|
||||
|
||||
![]() Quote:
Ok, here is an example of why i would use a skimmer instead of a canister. Eg. Feeding time - some brine shrimp (or other food/fish waste/etc) is floating around the water column. The water current is supposed to keep stuff from falling on the sand/substrate. So, it can get sucked into a canister - if you have foam, it can sit there decompose until you clean it (image a fish sitter on holidays...). Or it can get sucked into the skimmer which would throw it into the foam in the cup. The foam isn't part of the system now (unless it overflows...) and it tossed out on a regular basis. As for live rock, as I understand it (and someone may correct me on this), there is a special bacteria deep inside the rock which operates in anerobic conditions to help remove some of the nitrates. The rock also converts ammonia into nitrites and into nitrate, but it also has a small capacity to (remove/convert?) nitrates. Foam in the filter just lacks the ability to remove nitrate. (Also, how many times have you managed to rinse a sponge completely clean?) A canister with carbon can provide extra flow, but a powerhead will provide more flow for less money (and lacks the capacity to leak water on the floor if it breaks). Just provides a nice place to hide some carbon. |
#4
|
||||
|
||||
![]() Thought I might mention all my tanks are sumpless and relatively simple.
|
#5
|
||||
|
||||
![]() Just thought about something else to consider, while I was cleaning skimmers. It was a
pain where I live and that is when the power would go out I would have to unplug all filters empty and clean them....that is if I was home was at home when it happened, for me it was a huge job. Hope this is helping and not adding to your confussion. |
#6
|
||||
|
||||
![]() since you are getting advice from persons far more knowledgable than myself all I will say is welcome and you have made the smartest move you can by joining this forum and asking questions
__________________
Biocube 29 est 05/05/08, Koralia 1, 30lbs live rock, ,yellow tail blue damsel, pair cinnamon clowns, baby snowflake eel,Toadstool , metallic green mushroom, assorted zoos , kenya treen 180gall display, 190 pds live rock, virgate rabbitfish,bluejaw trigger, bubblletip anemone,yellow tang, sailfin tang,melanarus wrasse, cloud wrasse, ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|