|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
#11
12-10-2007, 12:59 AM
|
|||||
|
|||||
I use a peristaltic pump (fixed rate 120ml/min) connected to the Aquatronica. Right now it is set to come on for 1 minute, every 2 minutes. This provides a flow rate of 55ml/min. (120ml for the first minute, 0ml for the next minute) Flow is controlled by varying the time on/off by the second.
Here's the pump I use. This CDN company has been easy to work with and delivers promptly. http://www.omega.ca/shop/pptsc.asp?r...100&Nav=grel07 http://www.canreef.com/vbulletin/sho...t=28436&page=8 I use a slightly smaller version of the same pump to push water through the Kalk reactor in the exact same way. For both pumps, I went to RP Electronics and purchased a holding box and power cord to wire them up with. For you, the trick is to purchase the correct size of pump. Measure your current flow in ml/min, then purchase one that is exactly what you want (run it continuously)..or get a larger one and cycle it on/off for adjustable control.
__________________
400 gal reef. Established April, 2007. 3 Sequence Dart, RM12-4 skimmer, 2 x OM4Ways, Yellow Tang, Maroon Clown (pair), Blonde Naso Tang, Vlamingi Tang, Foxface Rabbit, Unicorn Tang, 2 Pakistani Butterflies and a few coral gobies My Tank: http://www.canreef.com/vbulletin/showthread.php?t=28436 Last edited by untamed; 12-10-2007 at 01:01 AM. 
|
|
#12
12-10-2007, 05:22 AM
|
|||||
|
|||||
|
__________________
Murray I reserve the right to hijack any thread I want to!! My carbon footprint is bigger than your carbon footprint !!!!
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
