![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]() I'm still getting my touch dialed in. I plan to make a review as well. As a teaser, I currently run a level float (programmed to an ato), pH, salinity, temp (my heater already had a temp controller on it so I programmed my unit to shut off for high temp as a backup). I also bought the leak detector (programmed to shut off the pumps to minimize damage), and the open source dimming module to context my rapidled modded hood to (Running a 28 gallon jbj nano). I have programmed one of the quick top buttons to shut off all pumps and skimmer to allow for feeding the anemones. So far so good. I'll try to get a more in depth review (but my only past experience was a reefkeeper years ago.
So far my only notable complaints are the wifi (It worked for access for a week and quit working via IP connection. I can still log in via wifi and my devices through the open ports) and the power bar. The plugs are so tight together that I bought 4" extension cord jumpers to make larger plugs work. One could argue that I have gone overboars for a 28gal. The plan is too upgrade when we get the new house in July and move the controller there. |
#2
|
|||||
|
|||||
![]() I have been talking to Errico about trying a new unit myself. I was researching online, and I have found this device (D-Link PowerLine Mini Starter Kit (DHP-309AV ~ $40 at best buy)) which allows you to add (WiFi or similar) to the basic controller.
Has anybody tried this before? Hope it helps on your decision. |
#3
|
|||||
|
|||||
![]() Quote:
__________________
You wouldn't want to see my tank. I don't use fancy equipment and I am a noob ![]() |
#4
|
|||||
|
|||||
![]() Hello guys
Again I thank you for all the kind words and interest in this controller . I have asked my reef central support guys to join this forum and help answer any technical question you might have concerning the set up configurations. I have also asked Aquatronica technical support staff in Italy to pop in once in awhile to help with any issues. We will be at interzoo Germany in 1 month and I will be sharing our new releases in both product and firmware. I will take great care of any existing and new Aquatronica owners. I will post up some pictures of our booth. thank you .
__________________
![]() |
#5
|
|||||
|
|||||
![]() Thank you Mrhasan for your reply,
Question; do I need an ORP probe? I currently own a 36 Gallon tank with 30 Gallon sump which I have started to move to an 80 Gallon with 30 Gallon Sump. I have a few healthy LPS but, I would like to have a reef tank. Any suggestions? |
#6
|
||||
|
||||
![]() https://www.amazon.ca/gp/product/B00...?ie=UTF8&psc=1
I use that TP-LINK for $18 shipped. After doing some troubleshooting, my connectivity issues appear to be from Router and that the Touch is communicating fine through that device to my router. So I guess my only complaint with the unit is the power bar. It is divided into 2 sections of 4, so you can plug a bigger end into the top of each run, but I do wish they were all spaced out better. Ah, this is much easier to type via a computer instead of a cellphone. I'm noticing lots of mistakes in my previous post. ![]() |
#7
|
|||||
|
|||||
![]() Does anybody know of an app to follow your Aquatronica controller from your android phone?
|
Thread Tools | |
Display Modes | |
|
|