Leds

[Myka]

Originally Posted by xenon

Any reason why you say 10% max UV?

We run ours @ 65%.

Seems to beat the crap out of LPS over time.

[hackerberry]

Hmm, that explains it. I run mine at 100%.

[maron6977]

Laurie , seen your tank , looks good . Might only suggest peak it into whiter at peak light time . But what do I know !

[The Guy]

Originally Posted by Myka

If you're referring to the retrofit kit in your signature, I don't know anything about that one either. I have a "standard" that I set clients' tanks to which are mostly AI brand. Something like this is typical for say a 24" deep tank.

Blues (of any type) 70-100%
Whites (of any type) 30-50%
UV 10% max
Green 10-15%
Red 5% or less
Purple Around 40%

It's kinda hard to correlate these to your though since I have no idea what the comparative output is.

Thanks for your info, the retrofit kit seems close to the outputs of the AI's I had on my 90 G, I am running my Blues @ 70% and my whites at 40% right now and may ramp up a few % on both and see how the corals do using that method. Thanks for the help.

Originally Posted by maron6977

Laurie , seen your tank , looks good . Might only suggest peak it into whiter at peak light time . But what do I know !

Hey Mark, thanks for your comments, how's the nem doing?