![]() |
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Hi Guys,
sorry to hijack, but do you guys think this will work for 10mm glass? also do you need to coat the magnets? http://www.princessauto.com/en/detai...ts/A-p8183915e thanks |
|
#2
|
|||||
|
|||||
|
I was just about to suggest Princess Auto.
I think those 8mm ones might be a bit small.... We've got a whole bunch of those ones on our fridge at home. Wish I was there and I would test them out.... http://www.princessauto.com/en/detai...ts/A-p8183907e These ones on the other hand, I struggle to get off the fridge... I bet these would work. Maybe even too strong lol. I made the mistake of using one to stick a couple receipts on the fridge and it was so stuck to the fridge it let me remove the paper around the magnet... but I couldn't get the magnet off. Otherwise it's princess auto... just return them! |
![]() |
| Thread Tools | |
| Display Modes | |
|
|