upgrading-advice welcome!

[muck]

Originally Posted by richtg

Argh! I have to figure out the pic posting process for this site!

If you edit your post and remove anything after ".jpg" the pictures should show up.

Like so...

Originally Posted by richtg

Here is a photo of the plumbing on my new tank

and here is the foam wall after sculpting around the overflows and all 16 return holes. I used about 5lbs of dried LR in the wall for a more natural look as well as some ledges to place frags on. The foam is coated with 5 coats of marine enamel and everything was allowed to cure for a week. Here is the finished wall.

It's hard to see the detail, but the depth of the foam varies between 1/2" and 4". Here is a pic of the tank with the LR and corals in it.

I kept all the coraline shavings from the old tank (new sump) and spread onto the foam wall. Should be saturated in a few months.

cheers