![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() Let there be light! (thanks to riceboy)
It's an ATI Sunpower 6x39w dimmable T5 fixture. I plan to mount a couple of Reefbrite blue LED strips on either side. Not sure if I'll be wanting the XHOs or the if the Techs will do the trick. Maybe XHOs on a dimmer? This way I can run some high PAR T5 bulbs and have the LEDs for the blue supplementation. I'll be running a combo of ATI Aquablue Special and Coral Plus. ![]() |
#2
|
|||||
|
|||||
![]() Wow! Nice fixture
|
#3
|
||||
|
||||
![]() Wow that was quick. Good to see it made it there in one piece.
Quote:
__________________
riceboys 82.7 gallon sps dominant tank -concept built 3'x2'x22" full starfire tank with starfire 1 piece eurobrace and built in wave box, 1 jebao wp25, 4 mp10wes, ati led Hybrid 8 bulb fixture, csc 250 skimmer, Magdrive 18 return pump, apex lite, custom sump from concepts, biopellet reactor and carbon and gfo,bubble magnus doser and jbj ato, custom acrylic frag tank with 6 bulb t5 http://www.canreef.com/vbulletin/showthread.php?t=70851 |
#4
|
|||||
|
|||||
![]() From Calgary to Saskatoon that freight would have moved by truck overnight and arrived at about 6:30 am.
![]() |
#5
|
||||
|
||||
![]() Should all work. i shoved styrofoam all around it lol
__________________
riceboys 82.7 gallon sps dominant tank -concept built 3'x2'x22" full starfire tank with starfire 1 piece eurobrace and built in wave box, 1 jebao wp25, 4 mp10wes, ati led Hybrid 8 bulb fixture, csc 250 skimmer, Magdrive 18 return pump, apex lite, custom sump from concepts, biopellet reactor and carbon and gfo,bubble magnus doser and jbj ato, custom acrylic frag tank with 6 bulb t5 http://www.canreef.com/vbulletin/showthread.php?t=70851 |
#6
|
|||||
|
|||||
![]() Well, I got to finishing the inside of the stand, and glued plywood to the steel. I used PL Premium and clamped it, but this morning when I released the clamps the glue came apart - still very wet. I looked at the label and it says to apply mechanical pressure for 24 hours. Holy crap. I didn't know it took that long to dry!
![]() Cell pic: ![]() |
#7
|
|||||
|
|||||
![]() I got a couple coats of paint on it. I noticed the glue popped on the bottom, so I have to re-glue that.
![]() The dry side. I have a shelf that I'm going to install on this side too. ![]() |
#8
|
|||||
|
|||||
![]() Starting to come together, I likey!
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|