![]() |
|
#1
|
||||
|
||||
![]() I have three over my 90 Gal and my colors are great...I have them all set at full... I run the blues from 8am to 11pm.....and run the whites from 2 to 9.
I also add some blue moon lights that come on at 9pm and they go off in the morning. |
#2
|
||||
|
||||
![]() I run mine 35 whites 60 blue great color
|
#3
|
||||
|
||||
![]() Thought u hated LEDs lol
|
#4
|
||||
|
||||
![]() |
#5
|
|||||
|
|||||
![]() Full whites? How high off the water is your fixture?
|
#6
|
|||||
|
|||||
![]() 75% Blue 25% White
__________________
So many ideas, so little money! |
#7
|
||||
|
||||
![]() I have two IT2080 on 2/3 of 8' tank, running manufacture's light schedule, 90-100% with all lens removed, just 3" and 9" from water and highest sps respectively.
Nice color, very slow-grow except bird-nest and purple green pocci which I have to kill every month. |
#8
|
|||||
|
|||||
![]() Quote:
I run my lights at 60% from 8 am to 9pm |
#9
|
||||
|
||||
![]() I have the 2040 and run it over my frag tank. I run a custom program but it maxes out at 50% white 80% blue
__________________
Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013. |
#10
|
|||||
|
|||||
![]() Recently changed from T5 HO to the IT2040 (similar LED's to the d120, I think?) and really like it, but it took awhile to get used to the blue factor
![]() Did quite a bit of reading and it seems that most run a fairly high percentage of blue to white, but for me, I'm happier with a max of 65% white to 50% or less blue (slowly ramp up and down from this). Time will tell if the tank agrees ![]() Tamara |
![]() |
Thread Tools | |
Display Modes | |
|
|