Bm Curve 7 owners

[Aquattro]

Ah! That can be a problem You'll need someone to measure.

[Noodles]

Yes

I was at concept the other day and measured the curve 5 which is 5.5". But I'd like to go with the 7 if i can get the cup in and out.

[ILIKECOUGARS]

I have a BM Hero 180S which should be the same as the curve 7 dimensions, the cup is 6.5"

[patman]

Am I missing something here? If the skimmer fits, you should only have to lift the cup up about 1" to be able to remove it.

[Aquattro]

Originally Posted by patman

Am I missing something here? If the skimmer fits, you should only have to lift the cup up about 1" to be able to remove it.

Yup, missing something He's concerned whether the cup fits between sump edge and stand to be able to remove it from the tank for cleaning.

[patman]

Doesn't the 20.8" height already include the cup?

[Aquattro]

Yes, but skimmer is going into sump, then sump into stand. The goal is make sure the cup by itself is removable afterwards.

[Noodles]

My sump is too tall. There's lots of room (height) for the skimmer but I won't be able to get the cup out, there's only 6" between the top of the sump and the stand.

Sump is 20" tall
And 26" tall opening