![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]() I'm in the process of cycling my tank and my Bubble Magus Curve 5 seems to be skimming water.
What's the optimal water height for this skimmer? Thank you! |
#2
|
|||||
|
|||||
![]() I would suggest to keep the skimmer off during cycle (you are taking away the stuffs that will cycle the tank) and the optimum height is around 8".
__________________
You wouldn't want to see my tank. I don't use fancy equipment and I am a noob ![]() |
#3
|
|||||
|
|||||
![]() I wouldn't agree with that portion. Protein skimmers are 100% efficient at pulling out matter. you would never skim your tank clean not causing a cycle. I as well as many others run it right from the start to help keep nutrients in check from the get go.
|
#4
|
|||||
|
|||||
![]() +1
__________________
ATI 48" 3x75W LED with 8x54W T5, 2xTunze 6105, 2 x Maxspect Gyre XF150, Bubble King Mini 200 ( soon to be replaced by a Bubble King SM 200), Eheim 1262, Via Aqua 300 watt Titanium heater, JBJ ATO, Apex Controller |
#5
|
|||||
|
|||||
![]()
__________________
Brad |
#6
|
||||
|
||||
![]() +3 I skimmed from start don't be surprises if your skimmer goes nuts foaming out the top. I let mine foam for about a week out the top then raised it up about a 1 1/2" it was still pulling junk out of water. After about 3 weeks it settled down and now sits on bottom of sump tuned in
|
#7
|
|||||
|
|||||
![]() I'm looking for help tuning my Curve 5... I feel clueless. Either it foams out the top, dumping my skimmate back into my sump, or (after I raise it) it seems to skim nothing.
Has anyone created an idiot's guide to tuning one of these? |
#8
|
|||||
|
|||||
![]() Have you adjusted the knob it raises and lowers water levels mine is backwards so min is max etc
|
![]() |
Thread Tools | |
Display Modes | |
|
|