Question about RO membrane

[mikellini]

Originally Posted by christyf5

right, I was thinking you had one of these and I'm glad you posted



LOL, yes Brad was telling me about this however he neglected to mention how to do it

thanks for all the quick replies guys! Much appreciated

Think about installing a flush as well, keeps the membrane cleaner longer.

http://www.reefsupplies.ca/online-st...ectrapure.html

[christyf5]

Originally Posted by mikellini

Think about installing a flush as well, keeps the membrane cleaner longer.

http://www.reefsupplies.ca/online-store/RO-Membrane-Flush-Valve-Kit-by-
Spectrapure.html

I think it might have one, where the valve is on that model, there is a little black box that has a cord that plugs into the wall. I guess its an auto flush? It turns on quite often.

[mikellini]

Originally Posted by christyf5

I think it might have one, where the valve is on that model, there is a little black box that has a cord that plugs into the wall. I guess its an auto flush? It turns on quite often.

Yeah, probably is, if it's working then you shouldn't get much buildup. Depends on your source water though, what's your source TDS?

[christyf5]

source is usually between 13 and 20. I haven't had the auto-flush plugged in in awhile so it would have helped to have that plugged in (cord wasn't long enough) but its had a pretty good run of 3 years. I need to change the DI (on order) before I can confirm that I need a new membrane but it seems likely that its the membrane just based on time alone.

[Aquattro]

Curious, what is the output? Anything to really worry about?

[christyf5]

Originally Posted by Aquattro

Curious, what is the output? Anything to really worry about?

It was 9 yesterday. Today its back to zero. I think its screwing with me. The tank is doing well so I think I wont worry about it too much.

[Aquattro]

Originally Posted by christyf5

It was 9 yesterday. Today its back to zero. I think its screwing with me. The tank is doing well so I think I wont worry about it too much.

That sounds sketchy. I'd measure a few more times and see if you can get a consistent reading.
Mine is probably not 0 anymore, but close enough.

[mikellini]

Originally Posted by christyf5

source is usually between 13 and 20. I haven't had the auto-flush plugged in in awhile so it would have helped to have that plugged in (cord wasn't long enough) but its had a pretty good run of 3 years. I need to change the DI (on order) before I can confirm that I need a new membrane but it seems likely that its the membrane just based on time alone.

Wow that's a great source! I thought 45 at my house was good haha