Scott's 135 gallon display tank build

[Gp Scott]

Originally Posted by ronau

You should message Torx, I believe he was a beta tester and has had Fusion for quite some time.

I sent torx a message last night. No response yet

[patman]

http://forum.neptunesystems.com/show...ighlight=jebao

That's the program I use but i've changed around some of the time and the intensity.

[Gp Scott]

Originally Posted by patman

http://forum.neptunesystems.com/show...ighlight=jebao

That's the program I use but i've changed around some of the time and the intensity.

I signed patman to my apex to see if he could program it see what happens.

[patman]

Originally Posted by Gp Scott

I signed patman to my apex to see if he could program it see what happens.

i got in. Have a few meetings right now. will look later.

[Gp Scott]

Put together this bad ass skimmer and tried out.

[patman]

Looked at the programming. Looks straight forward. Ramps up to 66% and 55% respectively over the day and then back down. Right now it's at 64% and 40%. Not sure what you think it isn't doing. if you try making a change sometimes it takes a few minutes before fusion communicates with the base unit. Maybe let me know what you think it should be doing and what it is doing.

[Gp Scott]

Originally Posted by patman

Looked at the programming. Looks straight forward. Ramps up to 66% and 55% respectively over the day and then back down. Right now it's at 64% and 40%. Not sure what you think it isn't doing. if you try making a change sometimes it takes a few minutes before fusion communicates with the base unit. Maybe let me know what you think it should be doing and what it is doing.

Sometimes they just shut right off I have to try and set the times on it and also add a heater not sure how to Change plug names