![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]() I have a 50-55g with a 10g sump and I have a Med->Heavy Bio load and am using the same skimmer as the original poster. I am using Bio-Pellets and Rowa and things are great... no looking back...
I am using a TLF Phosban 150 & have cut the central post about 2/3 the way down and secured it with plumbers tape. As well as the mesh to keep them in. I have a larger than normal pump but that way they dont clump. no regrets and the reactor was only a few bucks... whole thing was less than a hundred bucks... Vid: https://www.youtube.com/watch?v=Kh7LZExaMrA |
#2
|
|||||
|
|||||
![]() if it aint broke dont fix it
__________________
Current tank---125 gallon mixed reef 60 gallon sump, Reef octopus nw200 skimmer, Rapid LEDs, Maxspec gyre, Mp10s, Fuge, Biweekly 20% WC, QT everything |
#3
|
||||
|
||||
![]() I believe adding biopellets will reduce your nitrates, but you might experience a rise in phosphates. Remember the Redfield ratio is 106:16:1. You mess with one and another of the three might become the limiting factor. Adding biopellets (C source) will help you lower N for sure. But you will still need phosban to lower phosphates.
I run both biopellets and ROWAphos and I'm happy with my tank. Just start small, and increase the amount of biopellets gradually. |
![]() |
Thread Tools | |
Display Modes | |
|
|