Led help!!! setup

[eli@fijireefrock.com]

Are those LEDs rated to run at 1.3Amps? Looking at it from your photo doesn't seem so especially the red one.
Do you have the rating for those LEDs
double check the soldering job as to not cross wiring and no loose solder around them.
never worked with the meanwell drivers as to weather you require a potentiometer or not to run properly.

[eli@fijireefrock.com]

Zooming in on your solder job and from what I see your wiring is touching the edge of the star as it shouldn't and that's loosing and crossing the power leads to killing the LEDs.
Solder job should be clean and no burnt as dark spots witch restrict current flow.